Cooling Snake - 0.6m
WE788
Wow - do cold stabilization on one barrel, control fermentation temperatures in a 100L tank, or hang it from the christmas tree! With an overall length of 20 in. this little snake can be used to control temperatures in any small batch.
You do need a glycol system or at least a cold or hot water source to connect to the snake and we have several such small systems (see the You Might Also Need section below.)
How it works: This tube-within-a-tube snake is used to recirculate glycol or cooled/heated water through your ferment to regulated temperatures.
The inner vinyl tube runs through the middle of the corrugated stainless tubing, but is shorter than the stainless tubing. Glycol can run through one tube and back through the other, completing the loop.
Use our custom made Snake Bung to make an air tight seal. Slides over the snake and seals it to the barrel or the traditional air lock hole in a variable volume lid (provided the hole is approximately 1 3/4 in. in diameter.) Or punch a 1 3/4in. hole in any tank or lid.
Snakes are outfitted with 1/2in. BSPP straight threads, one male and one female. They can be converted to 1/2in. barbs with one 1/2in. BSPP coupler (H631A) and two 1/2in. MPT x 1/2in. barb fittings (H618).
|
