Custom Speidel Tank Notes:

Key Features

• Interior Finish - Speidel tanks feature an ultra-smooth 2R interior surface which effectively resists the build-up of tartarate residues. Clean your tanks with cold water after cold stabilization! Say goodbye to harsh cleaning chemicals and expensive CIP systems!

• Weld Quality - Speidel's laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms.

• Warranty - Speidel-Behaelter, GMBH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they?ll be around to honor that warranty should the need arise.

• Reinforced Tri-Clamp Valve Ferrules - Virtually all Speidel tanks come configured for use with Tri-Clamp (TC) style valves and fittings, in either 1.5" or 2" sizes depending on tank volume and the customer's needs. Racking ferrules are reinforced and can hold a tank mixer without addititional support. Other sizes and custom configurations are available upon request. **Please Note: TC valves not included. Please inquire with your sales associate for pricing on TC valves and fittings. Some tanks not equipped with Tri-Clamp Ferrules, please see specific product descriptions for more information.

• Variable volume lid with white rubber gasket
• 1,600L tank includes a lifting arm for the lid.

• AISI 304 stainless steel, outside and inside surface IIId (2R)
• Open tank top with strengthening rim
• Flat tank bottom
• External liter scale

• Up to 290 litres capacity: approx. 17 mm
• From 650 litres capacity: approx. 42 mm

• Up to tanks of 550 mm diameter (110L and 220L): female thread 3/4" (BSP) with plastic blank bung 
• From tanks of 630 mm diameter (290L through 1600L): male thread 1" (BSP) with plastic blank bung 

• Variable volume lid with white rubber gasket

• AISI 304 stainless steel, surface llld (2R), marbled outside
• Tank open on top with strengthening rim
• Vaulted tank bottom
• External liter scale
• Standing on three legs

• Up to 300 litres capacity: approx. 17 mm
• From 530 litres capacity: approx. 42 mm

• Up to tanks of 550 mm diameter (220L): female thread 3/4" (BSP) with plastic blank bung
• Up to tanks of 630 mm diameter (300L through 910L):  male thread 1" (BSP) with plastic blank bung 

• 1.5" TC
• 300L: reinforcement moulded out of the tank's casing
• 530L through 910L: welded on reinforcing plate

• Variable volume lid with white rubber gasket
• Tanks from 1,600L and up include a lifting arm; from 2,200L up the arm is winch-operated

• AISI 304 stainless steel, surface llld (2R), marbled outside
• Open tank top with strengthening rim, width of rim approx. 42mm
• Standing on three legs
• External liter scale
• Vaulted, stable tank bottom with integrally moulded forward down-slope for complete draining
• From diameter 2200 mm: located in bottom center with forward drawn discharge pipe

• 1,100L & 1,600L Tanks equipped with 1.5" TC. 2200L and larger tanks equipped with 2" TC.
• Reinforcing plate

• 1,100L & 1,600L Tanks equipped with 1.5" TC. 2200L and larger tanks equipped with 2" TC.

• Tank made of stainless steel AISI 304
• Inside and outside surface llld
• Tightly closing tension ring lid with silicone seal
• Plastic screw connection with blind cap for fermentation top piece
• Two stainless steel carrying handles

• Female thread 3/4'' (BSP) with plastic blank plug

• AISI 304 stainless steel, surface llld (2R), marbled outside
• Vaulted tank top, with filling dome 220 mm
• Lid with drilled hole diameter 38 mm and removable plastic blank cap to hold the fermentation lock with bung
• Flat tank bottom

• Up to 240L: female thread 3/4" (BSP) with plastic blank cap
• 320L and upwards: male thread 1" (BSP) with plastic blank cap

• AISI 304 stainless steel, surface llld (2R), marbled outside
• Vaulted tank top and bottom
• Filling dome in tank top 220 mm
• Lid with drilled hole diameter 38 mm and removable plastic blank cap to hold fermentation lock and bung
• Standing on three legs

• Up to 240L: female thread 3/4" (BSP) with plastic blank cap
• 330L and upwards: male thread 1" (BSP) with plastic blank cap

• Up to 240L: female thread 3/4" (BSP) with plastic blank cap
• 330L and upwards: male thread 1" (BSP) with plastic blank cap

• Tank shell and tank bottom made of AISI 304 stainless steel, surface llld (2R), marbled outside
• Tank top made of AISI 316 stainless steel, surface llld (2R), marbled outside
• From tank-diameter of 1000 mm upwards with lifting lugs
• Tanks from 2000 mm tank height upwards and stacking tanks with ladder safety bow
• Vaulted, stable tank top with moulded-on forward up-slope for complete filling and ventilation assuring a very small air contact area
• Free-standing base tank on three welded-on legs
• Stacking tank with three welded-on stacking legs
• Vaulted, stable tank bottom with integrally moulded forward down-slope for complete draining with moulded connection neck, impeding suction effect with bottom outlet neck

• Weld-on thread NW 10 DIN 11851 with sealing cap (for the installation of sampling tap)

• Stable manhole neck seamlessly moulded from the tank shell
• Up to 320L: 320 x 250 mm
• From 525L upwards: 420 x 320 mm
• Door with butterfly bow and hand wheel

• Moulded connection neck with 2" TC filling and vent neck 

• Up to 1,600L Tanks equipped with 1.5" TC. 1601L and larger tanks equipped with 2" TC.
• Up to 320L: fixed racking outlet plain surface
• From 525L upwards: with welded-on reinforcing plate

• Weld-on thread NW 10 DIN 11851 with sealing cap including fastening points on tank shell (for installation of fill level indicator)

• Up to 1,600L Tanks equipped with 1.5" TC. 1601L and larger tanks equipped with 2" TC.

• Tank shell and tank bottom made of AISI 304 stainless steel, surface llld (2R)/ lllc (2B)
• Tank top made of AISI 316 stainless steel, surface llld (2R)/ lllc (2B)
• Tank shell and legs marbled outside
• With lifting lugs and ladder stable tank top
• Free-standing on welded-on box-shaped legs - perfect stability and force transmission into the tank shell
• Vaulted, stable tank bottom, in bottom center with forward drawn discharge pipe and outlet

• Weld-on thread NW 10 DIN 11851 with sealing cap (for the installation of sampling tap)

• Stable manhole neck seamlessly moulded from the tank shell 420 x 320 mm, door with butterfly bow and hand wheel

• Welded stable manhole neck 340 x 440 mm, door with swivelling handle and toggle nut

• Weld-on thread NW 10 DIN 11851 with sealing cap including fastening points on tank shell (for the installation of fill level indicator)

• 2" TC filling and vent neck located in top center

• Up to 1,600L Tanks equipped with 1.5" TC. 1601L and larger tanks equipped with 2" TC.
• Reinforcing plate

• Up to 1,600L Tanks equipped with 1.5" TC. 1601L and larger tanks equipped with 2" TC.

• Tank shell and tank bottom made of AISI 304 stainless steel, surface llld (2R), marbled outside
• Tank top made of AISI 316 stainless steel, surface llld (2R), marbled outside
• With lifting lugs
• Base tank from 2000mm tank height upwards and stacking tank with ladder safety bow
• Vaulted, stable tank top with moulded-on forward up-slope for complete filling and ventilation assuring a very small air contact area
• Free-standing base tank on four welded-on legs
• Stacking tank with four welded-on stacking legs
• Vaulted, stable tank bottom with integrally moulded forward down-slope for complete draining with moulded connection neck, inhibiting suction effect with bottom outlet neck

• Weld-on thread NW 10 DIN 11851 with sealing cap (for the installation of sampling tap)
• Manhole
• Stable manhole neck seamlessly moulded from the tank shell 420 x 320 mm, door with butterfly bow and hand wheel

• Weld-on thread NW 10 DIN 11851 with sealing cap including fastening points on tank shell (for the installation of fill level indicator)

• Moulded connection neck with 2" TC filling and vent neck

• Up to 1,600L Tanks equipped with 1.5" TC. 1601L and larger tanks equipped with 2" TC.
• With welded-on reinforcing plate

• Up to 1,600L Tanks equipped with 1.5" TC. 1601L and larger tanks equipped with 2" TC.

• Tank shell and tank bottom made of AISI 304 stainless steel, surface llld (2R), marbled outside
• Tank top made of AISI 316 stainless steel, surface llld (2R), marbled outside
• With lifting lugs
• Base tank from 2000mm tank height upwards and stacking tank with ladder safety bow
• Vaulted, stable tank top with moulded-on forward up-slope for complete filling and ventilation assuring a very small air contact area
• Free-standing base tank on four welded-on legs
• Stacking tank with four welded-on stacking legs
• Vaulted, stable tank bottom with integrally moulded forward down-slope for complete draining with moulded connection neck, inhibiting suction effect with bottom outlet neck

• Weld-on thread NW 10 DIN 11851 with sealing cap (for the installation of sampling tap)

• Stable manhole neck seamlessly moulded from the tank shell 420 x 320 mm, door with butterfly bow and hand wheel

• Weld-on thread NW 10 DIN 11851 with sealing cap including fastening points on tank shell (for the installation of fill level indicator)

• Moulded connection neck with 2" TC filling and vent neck

• Up to 1,600L Tanks equipped with 1.5" TC. 1601L and larger tanks equipped with 2" TC.
• With welded-on reinforcing plate

• Up to 1,600L Tanks equipped with 1.5" TC. 1601L and larger tanks equipped with 2" TC.

• Inserted bottom made of AISI316

• Welded-on thread NW 10 DIN 11851 with sealing cap (for the installation of sampling tap)

• Stable manhole neck seamlessly moulded from the tank shell 420 x 320 mm, door with butterfly bow and hand wheel

• Up to 1,600L Tanks equipped with 1.5" TC. 1601L and larger tanks equipped with 2" TC.
• Reinforcing plate

• Weld-on thread NW 10 DIN 11851 with sealing cap on tank including fastening points on tank shell (for the installation of fill level indicator)

• The volume of the upper tank compartment corresponds with a standard tank size
• Vaulted, stable tank top
• Tank up to diameter of 2000 mm with integrally moulded forward up-slope for complete filling and ventilation assuring a very small air contact area
• With lifting lugs
• From 2000mm tank height upwards with ladder safety bow
• Vaulted, stable inserted bottom
• Up to tank-diameter of 2000mm with integrally moulded forward down-slope for complete draining moulded connection neck, impending suction effect with bottom outlet neck 
• From tank-diameter of 2200mm upwards with discharge cup located in the centre of the tank's bottom and forward drawn discharge pipe, outlet 

• From tank-diameter of 2200mm upwards welded-on connection neck located in top centre with 2" TC filling and vent neck

• Up to 1,600L Tanks equipped with 1.5" TC. 1601L and larger tanks equipped with 2" TC.

• Vaulted, stable inserted bottom
• Up to tank-diameter of 2000mm with intergrally moulded forward-down slope for complete draining moulded connection neck, impending suction effect with bottom outlet neck 
• From tank-diameter of 2200mm upwards with discharge cup located in the centre of the tank's bottom and forward drawn discharge pipe, outlet

• Inserted bottom of the upper tank compartment with 2" TC filling and vent neck for complete filling and ventilation

• Up to 1,600L Tanks equipped with 1.5" TC. 1601L and larger tanks equipped with 2" TC.

• Vaulted, stable inserted bottom
• Free-standing on welded-on box-shaped legs - perfect stability and force transmission into the tank shell
• Up to tank-diameter of 2000mm with integrally moulded forward down-slope for complete draining 
• From tank-diameter of 2200mm upwards with discharge cup located in the centre of the tank's bottom and forward drawn discharge pipe, outlet

• Inserted bottom of the upper  respectively middle tank compartment with 2" TC filling and ventilation neck for complete filling and vent
• moulded connection neck, impending suction effect with bottom outlet neck

• Up to 1,600L Tanks equipped with 1.5" TC. 1601L and larger tanks equipped with 2" TC.

• AISI304 stainless steel, surface IIId (2R), marbled outside
• Open tank top with strengthening rim
• Vaulted, stable tank bottom with integrally moulded forward down-slope for complete draining
• PE-transportation and storage base, accessible from underneath by forklift /pallet truck
• Up to 530 litres capacity with PE-transportation and storage base, accessible from two sides by forklift /pallet truck
• From 750 litres capacity onwards with PE-transportation and storage base, accessible from four sides by forklift /pallet truck

• Connecting neck for stirring device with 1.5" TC

• Moulded connection neck with 1.5" TC bottom outlet

• AISI304 stainless steel, surface IIId (2R), marbled outside
• Open tank top with strengthening rim
• Vaulted, stable tank bottom with integrally moulded forward downslope for complete draining
• With two fixed rollers and two guide rollers made of polyamide ø 150mm, case made of stainless steel, guide rollers with brake

• Connecting neck for stirring device with 1.5" TC

• Moulded connection neck with 1.5" TC bottom outlet

• AISI304 stainless steel, surface IIId (2R), shell marbled outside
• Tank open on top with strengthening rim, width of rim approx. 42mm
• With forklift profile 120x60mm, internal dimension form 114mmx54mm
• Stackable maximum two filled tanks
• Tank bottom as flat bottom
• With stainless steel tube feet

• AISI304 stainless steel, surface IIId(2R), marbled outside
• Vaulted tank top with lifting lugs
• Up to 525 litres capacity (820mm ø) with filler neck 220mm, lid with internal spring clip seal
• From 650 litres capacity upwards (1,000mm ø) with filler neck 400mm, flap lid with external spring clip seal, stainless steel vent neck male thread 1 1/2" (BSP) with sealing cap
• Vaulted tank bottom with bottom outlet male thread 1 1/4" (BSP)
• Up to 525 litres capacity (820mm ø) with PE-transportation and storage base, accessible from two sides by forklift /pallet truck
• From 650 litres capacity upwards (1,000mm ø) with PE-transportation and storage base, accessible from four sides by forklift /pallet truck

• AISI304 stainless steel, surface IIId(2R), marbled outside
• Stable on PE-transportation and storage base, accessible on four sides by forklift /pallet truck

• Filler neck NW 400 arranged in the centre of the tank top, flap lid with 2" TC vent neck 

• 2" TC Discharge outlet

• Tank shell and tank bottom are made of AISI304 stainless steel, surface IIId (2R), marbled outside
• Tank top made of AISI316 stainless steel, surface IIId (2R), marbled outside
• Vaulted tank top with lifting lugs
• With stable stainless steel framework, accessible from four sides by forklift /pallet truck
• Additionally accessible from two sides with forklift receptacles 120x60mm, internal dimension shape 114x54mm
• Stackable a maximum of three filled tanks

• With filler neck 400mm, flap lid with external spring clip seal, with stainless steel 2" TC vent neck

• Vaulted tank bottom with 2" TC discharge outlet 

• AISI304 stainless steel, surface IIId(2R), marbled outside
• With lifting lugs
• Vaulted, stable tank top with filler neck NW400mm
• Up to tank-ø of 820mm arranged in the centre of the tank top
• From tank-ø of 1,000mm upwards arranged up-front in tank top
• PE-transportation and storage base, accessible by forklift / pallet truck

• Flap lid with external spring clip seal, stainless steel vent neck AG G 1 1/2" (BSP) with sealing cap to hold fermentation lock and bung

• Discharge neck NW65 with outlet male thread 2 1/2" (BSP)

• AISI304 stainless steel, surface IIId(2R), marbled outside
• Tank open on top with strengthening rim
• Standing on three long legs
• External litre scale
• Crane made of AISI304 stainless steel with wire rope for floating lid
• Floating lid made of AISI304 stainless steel with inflatable sealing tube, air hose, air pump and manometer
• Variable volume lid with white rubber gasket

• Up to tank ø of 1,400mm mash outlet W=310mmxH=420mm at the bottom with door that opens in outward direction (the door is left hinged; door handle on the right)
• From tank-ø of 1,600mm mash outlet W=400mmxH=530mm at the bottom with door that opens in outward direction (the door is left hinged; door handle on the right)

• Up to 1,600L Tanks equipped with 1.5" TC. 1601L and larger tanks equipped with 2" TC.
• Reinforcing plate with drilled hole ø 48mm

• Vaulted, stable tank bottom with integrally moulded forward downslope for complete draining, Total outlet neck
• Up to 1,600L Tanks equipped with 1.5" TC. 1601L and larger tanks equipped with 2" TC.

• Up to tank-ø of 2,000mm made of AISI316 stainless steel, surface IIId(2R), marbled outside
• From tank-ø of 2,200mm upwards made of AISI 316 stainless steel, surface IIId (2R) / IIIc (2B)
• Ladder safety bow, lifting lugs

• Made of AISI304 stainless steel, surface IIId(2R), marbled outside

• Up to tank-ø of 2,000mm made of AISI304 stainless steel, surface IIId(2R), marbled outside
• From tank-ø of 2,200mm upwards made of AISI304 stainless steel, surface IIId(2R)/IIIc(2B)
• Free standing on welded boxshaped legs

• Filler neck NW400, located in tank top with an upright forward position (tank top with bead extrusion for complete ventilation)
• Flap lid with 2" TC vent neck

• Weld-on thread NW10 DIN11851
• Threaded sleeve with locking screw and cap nut NW10 DIN11851
• Bi-metal dial thermometer ø 100mm, measurement range -20°C to +60°C

Sampling

• Weld-on thread NW20 DIN11851
• Sampling tap with cap nut NW20 DIN11851

• Reinforced plate with 2" TC

• Welded-on neck 2" TC

• Electronic control system (stainless steel control cabinet, by default located on the right), Connection 220V, 50Hz, IP44
• Immersion time and pause time inverter controlled
• Pneumatic cylinder flange mounted on the reinforced top
• Piston rod and immersion unit made of stainless steel

• Tank volume minimum 90 litres
• Fan efficiency 500 litres / minimum at 6bar
• The compressor’s pressurised air must be prepared with an air preparation unit!
• We recommend the following air preparation units: FESTO FRC-1/2-D-MIDI-A (Order No. 159591), SMC AC40A-FO4DE

• Immersion depth 1,000mm
  • 12.3 litres / lifting force
• Immersion depth 1,250mm
  • 15.3 litres / lifting force
• Immersion depth 1,500mm
  • 18.3 litres / lifting force
• Immersion depth 1,750mm
  • 21.4 litres / lifting force

• Mash W=530mm xH=400mm, with outwards opening hinged door: the door is left hinged; door handle on the right (extract a sufficient amount of juice in order to avoid the emission of wine while opening)
• Discharge height X=580mm

• Mash W=530mmxH=400mm, with outwards opening hinged door: the door is left hinged; door handle on the right (extract a sufficient amount of juice in order to avoid the emission of wine while opening)
• Stainless steel remover with gear motor (approx. 4rot. /min), electricity supply 380V, 50Hz
• Discharge height A=see chart in Speidel Catalog

• Mash bottom outlet W=530mmxH=400mm with slide feed proportioning, easy to dose easy, also for thin mash release
• Discharge height X=520mm

• Mash outlet W=530mmxH=400mm, with slide feed proportioning, easy to dose, also for thin mash release
• Stainless steel remover with gear motor (approx. 4rot. /min), electricity supply 380V, 50Hz
• Discharge height B=see chart in Speidel Catalog

• Up to tank-ø 2,000mm made of AISI316 stainless steel, surface IIId(2R)
• From tank-ø of 2,200mm upwards made of AISI316 stainless steel, surface IIId(2R) / IIIc (2B)
• Ladder safety bow, lifting lugs

• Made of AISI304 stainless steel, surface IIId(2R), marbled outside

• Up to tank-ø of 2,000mm made of AISI304 stainless steel, surface IIId(2R)
• From tank-ø of 2,200mm upwards made of AISI304 stainless steel, surface IIId(2R) / IIIc (2B)
• Free-standing on welded-on box-shaped legs

• Filler neck NW400, located in tank top with an upright forward position (tank top with bead extrusion for complete ventilation)
• Flap lid with 2" TC vent neck

• Weld-on thread NW10 DIN11851
• Threaded sleeve with locking screw and cap nut NW10 DIN11851
• Bi-metal dial thermometer ø 100 mm, measuring range -20°C to +60°C

• Weld-on thread NW20 DIN11851
• Sampling tap with cap nut NW20 DIN11851

• Reinforcing plate with 2" TC

• Welded-on neck 2" TC

• Electronic control system (stainless steel control cabinet, by default located on the right)
• Connection 220V, 50Hz, IP44
• Immersion time and pause time inverter controlled
• Pneumatic cylinder flange-mounted inside on the reinforced top, piston rod and immersion unit made of stainless steel

• Compressor capacity minimum 90 litres
• Fan efficiency 500 litres / minimum at 6bar
• The compressor’s pressurised air must be cleaned with an air preparation unit!
• We recommend the following air preparation units: FESTO FRC-1/2-D-MIDI-A (Order No. 159591), SMC AC40A-FO4DE

• Immersion depth 1,000mm
  • 12.3 litres / lifting force
• Immersion depth 1,500mm
  • 18.3 litres / lifting force
• Immersion depth 1,250mm
  • 15.3 litres / lifting force
• Immersion depth 1,750mm
  • 21.4 litres / lifting force

• Mash bottom outlet W=530mmxH=400mm, with outwards opening hinged door: the door is left hinged; door handle on the right (extract a sufficient amount of juice in order to avoid the emission of wine while opening)
• Discharge height X=580mm

• Mash outlet W=530mmxH=400mm with outwards opening hinged door: the door is left hinged; door handle on the right (extract a sufficient amount of juice in order to avoid the emission of wine while opening)
• Stainless steel remover with gear motor (approx. 4U/ min), Electricity supply 380V, 50Hz
• Discharge height A=see chart in Speidel Catalog

• Mash outlet W=530mmxH=400mm with slide feed proportioning, easy to dose, also for thin mash release
• Discharge height X=520mm

• Mash outlet W=530mmxH=400mm with slide feed proportioning, easy to dose, also for thin mash release
• Stainless steel remover with gear motor (approx. 4rot. /min), electricity supply 380V, 50Hz
• Discharge height B=see chart in Speidel Catalog

• Up to tank-ø of 2,000mm made of AISI316 stainless steel, surface IIId(2R), marbled outside
• From tank-ø of 2,200mm upwards made of AISI316 L/316 stainless steel surface IIId(2R) / IIIc (2B)
• Ladder safety bow, lifting lug

• Made of AISI304 stainless steel, surface IIId(2R), marbled outside

• Up to tank-ø of 2,000mm made of AISI304 stainless steel, surface IIId(2R), marbled outside
• From tank-ø of 2,200mm upwards made of AISI304 stainless steel, surface IIId(2R) / IIIc (2B)
• Free-standing on welded-on box-shaped legs perfect stability and force transmission into the tank

• Filler neck NW 400, located in tank top with an upright forward position (tank top with bead extrusion for complete ventilation)
• Flap lid with 2" TC vent neck

• Weld-on thread NW10 DIN11851
• Threaded sleeve with locking screw and cap nut NW10 DIN 11851
• Bi-metal dial thermometer 100mm ø, measuring range –20° to +60°C

• Weld-on thread NW20 DIN11851
• Sampling tap with cap nut NW20 DIN11851

• Reinforcing plate with 2" TC

• Stainless steel pipeline NW50 with self-rotating sprinkling system
• Connecting thread NW50 DIN11851, from ø 2,800mm upwards with two flooding heads

• Horizontally staggered moulded pipes break the descending marc into pieces

• Welded-on neck with 2" TC

• Mash bottom outlet W=530mmxH=400mm, with outwards opening hinged door: the door is left hinged; door handle on the right (extract a sufficient amount of juice in order to avoid the emission of wine while opening)
• Discharge height X=580mm

• Mash outlet W=530mmxH=400mm with outwards opening hinged door: the door is left hinged; door handle on the right (extract a sufficient amount of juice in order to avoid the emission of wine while opening)
• Stainless steel remover with gear motor (approx. 4rot. /min), electricity supply 380V, 50Hz
• Discharge height A=see chart in Speidel Catalog

• Mash bottom outlet W=530mmxH=400mm, with slide feed proportioning, easy to dose, also for thin mash release
• Discharge height X=520mm

• Mash outlet W=530mmxH=400mm with slide feed proportioning, easy to dose, also for thin mash release
• Stainless steel remover with gear motor (approx. 4rot. /min), electricity supply 380V, 50Hz
• Discharge height B= see chart in Speidel Catalog

• Up to tank-ø of 2,000mm made of AISI316 stainless steel, surface IIId (2R), marbled outside
• From tank-ø of 2,200 mm upwards made of AISI316 stainless steel, surface IIId(2R) / IIIc (2B)
• Ladder safety bow, lifting lugs

• Made of AISI304 stainless steel, surface IIId(2R), marbled outside

• Up to tank-ø of 2,000mm made of AISI304 stainless steel, surface IIId(2R)
• From tank-ø of 2,200mm upwards made of AISI304 stainless steel, surface IIId(2R) / IIIc (2B)
• › Free-standing on welded-on box-shaped legs

• Filler neck NW400, located in tank top with an upright forward position (tank top with bead extrusion for complete ventilation)
• Flap lid with 2" TC vent neck

• Weld-on thread NW10 DIN11851
• Threaded sleeve with locking screw and cap nut NW10 DIN11851
• Bi-metal dial type thermometer 100mm ø, measuring range -20 ° to +60°C

• Weld-on thread NW20 DIN11851
• Sample tap with cap nut NW20 DIN11851

• Reinforcing plate with 2" TC

• Four removable, individually lockable jets are laterally arranged at the tank
• The jets provide the air impulses for the mixing of the mash

• Welded-on neck 2" TC

• Local air supply for purified pressurised air is 2x1"
• The accumulator of the compressor or an interim accumulator has to provide oil-free, clean pressurised air
• We recommend a pressure accumulator with a minimum volume of 1,000 litres at 6bar
• For a short time the flow rate output is at approx. 10,000 litres /min.
• For the cleaning of the air a corresponding filter system needs to be connected ahead of the accumulator

• Mash bottom outlet W=530mmxH=400mm, with outwards opening hinged door: the door is left hinged; door handle on the right (extract a sufficient amount of juice in order to avoid the emission of wine while opening)
• Discharge height X=580mm

• Mash outlet W=530mmxH=400mm with outwards opening hinged door: the door is left hinged; door handle on the right (extract a sufficient amount of juice in order to avoid the emission of wine while opening)
• Stainless steel remover with gear motor (approx. 4rot. /min), electricity supply 380V, 50Hz
• Discharge height A=see chart in Speidel Catalog

• Mash bottom outlet W=530mmxH= 400mm, with slide feed proportioning, easy to dose, also for thin mash release
• Discharge height X=520 mm

• Mash outlet W=530mmxH=400mm with slide feed proportioning – easy to dose, also for thin mash release
• Stainless steel remover with gear motor (approx. 4rot. /min), electricity supply 380V, 50Hz
• Discharge height B=see chart in Speidel Catalog

• Up to tank- ø 2,000mm made of AISI316 stainless steel , surface IIId(2R), marbled outside
• From tank-ø 2,200mm upwards made of AISI316 stainless steel, surface IIId(2R) / IIIc (2B)
• Ladder safety bow, lifting lugs

• Made of AISI304 stainless steel, surface IIId(2R), marbled outside

• Up to tank-ø of 2,000mm made of AISI304 stainless steel, surface IIId(2R), marbled outside
• From tank-ø of 2,200mm upwards made of AISI304 stainless steel, surface IIId(2R) / IIIc (2B)
• Free-standing on welded-on box-shaped legs

• Filler neck NW400, located in tank top with an upright forward position (tank top with bead extrusion for complete ventilation)
• Flap lid with 2" TC vent neck 

• Stable stirring shaft, stirring blades for the homogenisation and release of the mash
• Electronic control system (stainless steel control cabinet, by default arranged on right), On/Off, connection 380V, 50Hz, IP44
• Stainless steel remover with scraper made of vulkollan (polyurethan) with gear motor (approx. 8rpm), power output 3kW up to ø 2,400mm, electric connection on site
• Stainless steel remover with scraper made of vulkollan with gear motor (approx. 8rpm), power output 5,5kW at ø 2,800mm, electric connection on site

• 420x320mm, door with bow and hand wheel with electric fuse

• Reinforcing plate with 2" TC

• Welded-on neck with thread NW125
• Discharge height X=420mm

• Tank top and tank bottoms made of AISI304 stainless steel, surface IIId(2R), marbled outside
• Ladder safety bow
• Free-standing on welded-on support saddles

• Filler neck NW400, positioned up front, Flap lid with 2" TC vent neck, secured by protection bar

• Weld-on thread NW10 DIN11851
• Threaded sleeve with locking screw and cap nut NW10
• Bi-metal dial thermometer 100mm D, measuring range -20°C to +60 °C

• Reinforced plate with 2" TC

• Weld-on thread NW20 DIN11851
• Sampling tap with cap nut NW20 DIN11851

• Welded-on neck with thread NW125

• Electronic control system (stainless steel control cabinet, by default arranged on the left), Connection 380V, 50Hz, IP44
• Immersion time and pause time continuously variable, stable stirring shaft
• Immersion arms with scrapers for the immersion and release of the mash
• Gear motor speed 380V, 50Hz, one slow rotational speed (approx. 6rpm) for the recirculation/ regroupment during the mash fermentation and for efficient release

• Up to tank-ø of 2,000mm made of AISI316 stainless steel, surface IIId (2R)
• From tank-ø 2,200mm upwards made of AISI316 stainless steel, surface IIId(2R) / IIIc (2B)
• Ladder safety bow, lifting lugs

• Made of AISI304 stainless steel,
• surface IIId(2R)
• Surface outside optionally
• marbled or brushed

• Up to tank-ø of 2,000mm made of AISI304 stainless steel, surface IIId(2R)
• From tank-ø of 2,200mm upwards made of AISI304 stainless steel, surface IIId(2R) / IIIc (2B)
• Free-standing on welded-on boxed, closed legs, perfect stability and force transmission into the tank

• Filler neck NW1000, located in the tank’ top center, flap lid with 2" TC vent neck, secured by bars

• Weld-on thread NW10 DIN11851

• Weld-on thread NW10 DIN11851 with sealing cap including fastening points at tank top (for installation of fill level indicator)

• Reinforcing plate with 2" TC

• Welded-on neck 2" TC

• Mash bottom outlet W=530mmxH=400mm with outwards opening hinged door: the door is left hinged; door handle on the right (extract a sufficient amount of juice in order to avoid the emission of wine while opening)
• Discharge height X=580mm

• Up to tank-ø of 2,000mm made of AISI316 stainless steel, surface IIId (2R), marbled outside
• From tank-ø 2,200mm upwards made of AISI316 stainless steel, surface IIId(2R) / IIIc (2B), not marbled outside
• Ladder safety bow, lifting lugs

• Oak 55mm wall thickness with unique matched joint of wood and stainless steel

• Up to tank-ø of 2,000mm made of AISI304 stainless steel, surface IIId(2R), marbled outside
• From tank-ø of 2,200mm upwards made of AISI304 stainless steel, surface IIId(2R) /IIIc (2B), not marbled outside
• Free-standing on welded-on box-shaped legs

• Up to 5,300 litres filler neck NW800, located in the centre of the tank top, flap lid with 2" TC vent neck, secured by bars
• From 6,100 litres upwards filler neck NW1000, located in the centre of the tank top, flap lid with 2" TC vent neck, secured by bars

• Weld-on thread NW10 DIN11851

• Weld-on thread NW10 DIN11851 with sealing cap including fastening points at tank top (for installation of fill level indicator)

• Reinforcing plate with 2" TC

• Weld-on neck 2" TC

• Mash bottom outlet W=530mmxH=400mm with outwards opening hinged door: the door is left hinged; door handle on the right (extract a sufficient amount of juice in order to avoid the emission of wine while opening)
• Discharge height X=580mm

• Respiration via wooden shell
• Perfect temperature equalisation via the wooden shell
• Sensory balancing/perfection of the aroma
• Compared to a tank entirely made of wood: remarkably better cleaning/draining via the stainless steel bottom outlet
• Significant improvement in quality due to the combination of oak timber and stainless steel
• Unique matched joint of oak timber and stainless steel in typical Speidel quality

• 2 x 1'' male BSPP connection ports per cooling jacket panel.
• Weld-on thread NW 10 DIN 11851 for temperature measurement (position located above sampling)

• Ports in choice of straight position or 45 degree position.
• Diameter up to 2000mm: Ports oriented in back.
• Diameter 2200mm and up: Ports oriented on left side.

• 900x1400mm: Ports oriented in choice of front right, back right, front both sides, or back both sides.
• 1100x1400: Ports oriented in choice of front right, back right, front both sides, or back both sides.
• 1300x1800: Ports oriented in choice of front right, back right, front both sides, or back both sides.
• 1500x2000: Ports oriented in choice of front both sides or back both sides.
• 1400x1400: Ports oriented in choice of front both sides or back both sides.