Logo
 
MoreWineMaking!
BrewBuilt® MiniMax CoolStix™ Complete Kit for Tri-Clamp Connections
GLY5300P

BrewBuilt® MiniMax CoolStix™ Complete Kit for Tri-Clamp Connections

Returns
60 day no hassle return policy. Details
Lowest Price Guarantee
This item has M.A.P. pricing so you can be confident you won’t find it for less.  Learn More.
Description

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.

The BrewBuilt CoolStix is a revolutionary cooling solution for 7 to 14 gallon conical fermenters wtih tri-clamp fittings. It is easy to clean, easy to setup, and cools quickly and efficiently. The CoolStix uses a submersible pump to circulate cooling solution and a digital temperature controller to regulate flow. When the controller's temperature probe detects that the fermentation temp is getting too hot, it will power on the submersible pump to run ice water or glycol through the CoolStix. Once the temperature stabilizes, the controller will shut off the pump and stop circulation.

A cold water source is needed to provide the cooling solution. For maintaining ale temperatures, a cooler or bucket of ice water is sufficient in most cases. For maintaining lager temperatures, we recommend the Icemaster 100 Glycol Chiller.
 

Includes:

  • 1.5" T.C. MiniMax CoolStix (GLY530)
  • Submersible Pump (PMP602)
  • BrewBuilt Chilling Pump Attachment Kit (GLY356)

CoolStix Specs:

  • Diameter - 1"
  • Overall Length - 22¼"
  • Bottom of CoolStix to T.C. Fitting - 20"
  • Width from CoolStix to Barb - 6½"
  • Made from 304 Stainless Steel

Please note: the kit does not include a 1.5" Tri-Clamp and Gasket.

Prebook Item: Please note this item is not currently in stock, but is available for Pre-Order. We do require payment in full in order to reserve stock.
 
 
Item # GLY5300P
Weight 6 LBS
Documents

Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
My fermenter has a 3" TC opening at the top, which is primarily used for the blow-off tube. How could I use a CoolStix without taking away the ability to vent CO2? Also, how far above the TC fitting are the two curved inlet and outlet arms?
Daniel C on Jul 8, 2019
BEST ANSWER: Hi Daniel - this version of the MiniMax CoolStix is recommended for fermenters that have multiple T.C. ferrules on top. For your setup, we would recommend the MiniMax CoolStix w/ Blowoff (GLY5340P). For both versions the curved inlet/outlet arms are approximately 2-1/4" above the T.C. fitting.
Reviews

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Rated 5 out of 5
Works great! It does what I need it too
May 6, 2022
Purchased
over 2 years ago