Bucket Blaster - Keg and Carboy Washer

Bucket Blaster - Keg and Carboy Washer

Item currently out of stock

Take the work out of cleaning corny kegs, carboys and brewing vessels with the Bucket Blaster -- a great way to get your kegs, fermenters, FermZilla, carboys or other brewery gear clean while you tend to other tasks. Simply set up the keg washer basin with your cleaner or sanitizer, set a keg or carboy on over the jet nozzle, power up the pump and let the keg washer do the work. 

This unit comes with a 15L bucket, which doubles as a storage container when you are not using the system.  Some other keg washers come with a very small reservoir making it a pain to move, as liquid spills over the sides easily and generally they just do not work as well. This unit has a large 15L bucket making it much less likely for you to spill liquid on the floor.

The Bucket Blaster includes a 2,000 liter per hour pump, 15L bucket, a powerful jet nozzle, 9.5mm OD EVABarrier tubing, a duotight tee piece, a gray and black ball lock disconnect and the stainless stand.

Kegland Part Number: KL15905



Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 7 questions Browse 7 questions and 31 answers
Why did you choose this?
MoreFlavor Store
I wanted a powerful cleaner that I didn't have to build (and over spend on) that would clean diptubes and keg at once. I just hope that I can modify for fittings to interchange the tubes to accept both ball- and pin-lock kegs.
Chris Davinroy on Nov 18, 2020
Price and Reviews
Jerry John Hernandez M on Oct 30, 2020
I wanted a powerful cleaner that I didn't have to build (and over spend on) that would clean diptubes and keg at once. I just hope that I can modify for fittings to interchange the tubes to accept both ball- and pin-lock kegs.
Chris Davinroy on Nov 18, 2020
Should help make cleaning & sanitizing my keg a lot easier.
Christopher K on Nov 3, 2020
Price and Reviews
Jerry John Hernandez M on Oct 30, 2020
Kathleen W on Oct 21, 2020
Compact storage. Price. Old DIY cleaner died.
Jay E on Sep 30, 2020
Price compared to other similar products and not much m ore than building one.
Richard D on Sep 14, 2020
I like that it is self contained and has a large reservoir
Chris L on Sep 14, 2020
I don't have a keg cleaner
TJ on Aug 26, 2020
To Clean
Eric T on Aug 19, 2020
About a third of the price of SS Brewtech model sold on this site
roul c on Aug 13, 2020
Need a better keg cleaning solution
Valued C on Aug 13, 2020
favorable you tube review
bil a on Aug 13, 2020
Tired of hand cleaning and sanitizing kegs and fermenters
Richard D on Aug 12, 2020
Husband does homebrew
Suzie J on Aug 11, 2020
Try it out.
Edward on Aug 7, 2020
I have a Marks keg washer but looking for something more complete.
Wade S on Aug 7, 2020
It should save time and cleaning /sanitizing agents
Scott L on Aug 7, 2020
My son wanted it for his birthday
Sophia H on Aug 7, 2020
Ronald S on Aug 7, 2020
Better option to clean carboys and kegs
Bryan S on Jul 30, 2020
Should help make cleaning & sanitizing my keg a lot easier.
Christopher K on Nov 3, 2020
Kathleen W on Oct 21, 2020
Can this be changed to PIN keg fittings?
Cory Barrow on Aug 5, 2020
BEST ANSWER: Yes it can! All you need is the plastic Pinlock QDs and it will setup exactly the same way.
Will a 1/2” NPT fitting work on the spray end of this?
William Haumann on Aug 21, 2020
BEST ANSWER: Yes. I just received this and the CIP ball I had purchased fits directly on the end of the threaded tube (long nipple). Since that's PVC and the CIP fitting is stainless, I'm not sure if I'll apply any pipe tape to it. I'll do a test run in the next day or so. Since I'll be using it to clean out some sanke keg fermenters to use on Saturday.
What is the diameter of the frame?
Branden Borden on Aug 18, 2020
I see a previous post where it is explained that this could be converted from ball to pin lock fittings. Is it possible to equip this with MFL fittings as I have several of pin and several ball lock cornies?
Chris Davinroy on Nov 1, 2020
BEST ANSWER: The fitting slip onto the tube and self lock as do all other connections they are easy to install and remove. There is plenty of extra tubing so if you wanted to clamp other fitting onto another piece of tubing swapping between them should be easy.
What's the temperature rating for the pump? Can I buy the set without the pump and use my riptide pump?
Timothy Chilcoat on Aug 13, 2020
BEST ANSWER: The kit is only sold as a complete set and the pump cannot be removed. The pump can be operated safely with fluid at 150 degrees fahrenheit or less indefinitely; momentary exposure to 190 degrees will not cause lasting damage, but continual operation at that temperature may.
Does this system work with KOMOS type curved top kegs?
Joe Keesling on Aug 9, 2020

4.3 / 5.0
12 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Works Perfectly and an Outstanding Value
I wanted a way to clean my new Fermzilla and kegs that didn't involve scrubbing or waiting. This solution also only uses about 2 gallons of water to get the job done. The pump is very powerful and all the connections are easily replaceable if necessary. It works great to clean kegs as you get the inside and both posts at the same time. Brilliant really! I find it helps to turn the item being cleaned a little every couple of minutes to ensure even coverage. I would recommend this to any brewer looking to get a great clean in less time and less cleaning/sanitizing product. I would NOT use Starsan as it will foam like crazy. Use another low foam item.
October 5, 2020
2 months ago
Works great.
Does a great job at a great price. I’m really
Stoked to have this tool for my home brewery.
September 22, 2020
3 months ago
Might be good if i had assembly instruction
When t assemble this today and I have a bucket of parts - no instructions. I m hoping someone on youtube might have accomplished this.
September 16, 2020
3 months ago
will do the job
is nice due to good volume of cleaning liquid amount and many different applications.
September 2, 2020
3 months ago
Big Help
I have really enjoyed having this toy in my brewery. Works a little better than I expected on corny kegs, including my 10 gallon kegs (with a bigger bucket). The bonus has been using it to power the CIP ball in my conical fermenter.

I knew going in I could not use hot water, but with PBW in lukewarm water and just a little more time than with hot water, my equipment comes out clean.

You could probably cobble together something similar by just buying a pump, but the design of little metal stand was a very pleasant surprise, and makes the whole system work better than something I could have come up with on my own.

All in all, I am very pleased. Definitely exceeded my expectations.
September 2, 2020
3 months ago
Works great now that it is working
When I received my Bucket Blaster the pump didn't work. I contacted Morebeer and they replaced it. No questions asked. The new one works great. Morebeer has GREAT customer service. I would recommend this product AND this company to my friends and family.
September 1, 2020
3 months ago
Kegland Bucket Blaster
Have only used it to clean a Fermonster 7 gal, plastic carboy but it did an excellent job. Watching the spray, I believe it will do a great job on corny kegs. I gave it 4 stars because there are no instructions on how to assemble or use it. With the help of Youtube (https://www.youtube.com/watch?v=GWldhF3ebUE) it was pretty easy.
August 31, 2020
3 months ago
Good overall!
Overall this keg/carboy washer is great. Stores nice and compact and does what it’s supposed to do. I like the included tee fitting for cleaning the posts and dip tubes in my corny kegs and it has good pressure. I wish there was a setup that worked for cleaning buckets but since they’re so easily cleaned this isn’t a deal breaker. The reason it isn’t five stars is the complete lack of good directions. I eventually figured out how everything went together by looking at stock photos online and probably would’ve figured things out after a bit, but construction wasn’t obvious (at least for me). Will have to see how the pump holds up over time.
August 26, 2020
3 months ago
Does the job.
Does a great job of cleaning kegs. Instructions for assembly are not included. It's simple enough, but at least a diagram should be included. A larger diameter bucket would have made this more versatile.
August 24, 2020
3 months ago
Works Well
I like this bucket washer pretty well for washing my old 6.5 gallon glass carboys. I did need to make a modification, the outer dimension of the nut that goes on the top of the sprayer was too big to get the sprayer into the carboy. I had to file off the 6 points where the edges of the nut come together so that it would fit. Since it's made of PVC, it was not a big deal to do.
August 20, 2020
3 months ago