Logo
 
MoreWineMaking!
Flow Control Shank Adapter
D1223

Flow Control Shank Adapter

In Stock
Delivers to ( change ) by as part of our Fast & Free Shipping.
Faster Shipping Available. Details.
Returns
60 day no hassle return policy. Details
Description

Changes any faucet into a flow control faucet! Simply add this adapter in between your tap and shank, then you can adjust the flow with an allen wrench. Once adjusted, the flow is locked in and cannot be accidentally changed. This adapter will fit most shanks.

To make adjustments, first loosen the top and bottom hex head screws with the allen wrench. Turn the middle ring to adjust flow restriction. Open your faucet to test the flow restriction and make further adjustments if needed. Once the desired restriction is dialed in, retighten the top and bottom screws.

Does not include the body gasket for connecting the adapter to the shank. If you do not already have a spare on hand, please find the body gasket below under "You Might Also Need".

Please note: the shank collar and small adjustment screw are made from chrome plated brass. All other parts are made from stainless steel, including all parts that come into contact with liquid.

Kegland Part number: KL01151

Item # D1223
Shipping Eligible for Free Shipping Program
Availability California - In Stock
Pennsylvania - In Stock
Weight 1 LBS
Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 1 answer
Why did you choose this?
MoreFlavor Store
currently keeper foam too much due to short 3/16id serving line
David N on Nov 14, 2022
Looking for a way to control the flow from my faucet.
EMILY G. on Jan 27, 2021
currently keeper foam too much due to short 3/16id serving line
David N on Nov 14, 2022
Cheaper than a flow control faucet.
Richard T on Aug 29, 2022
Looking for a way to control the flow from my faucet.
EMILY G. on Jan 27, 2021
More affordable then a new faucet
hutch on Jun 27, 2020
to control the flow from my shank.
Alexander B on Jun 4, 2018
Simple, inexpensive and adjustable flow control modification for for my keezer project.
James van E on Mar 31, 2018
Tired of hoses and foamy beer!
Nicholas L on Feb 14, 2018
Cheaper than a flow control faucet.
Richard T on Aug 29, 2022
More affordable then a new faucet
hutch on Jun 27, 2020
What are the required gaskets for this flow controller? I need to replace one in the interior of the unit and it seems that both exterior sides also need faucet gaskets. Without the gaskets I have been having foam issues - could that be a cause?
Michael P Burke on Jan 31, 2018
BEST ANSWER: The internal gasket on the flow controller is 16.2 mm. Beer faucet body gaskets (D1200B) can be used on both exterior sides for a better seal, which will likely help with foaming issues.
Beer Faucet Parts | Body Gasket
Beer Faucet Parts | Body Gasket
what is this beer shank thread size?
Pedro Carvalho on Jun 14, 2023
Reviews

2.5 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
0
1
1
0
Rated 3 out of 5
Flow control schank adapter.
Adaptor appears to be well made. Dose the intended job, but has leakage issues. The addition of an o-ring might solve that problem.
March 21, 2018
Purchased
over 6 years ago
Rated 2 out of 5
Not a substitute for proper line length
These work well to fine tune the flow but you still need to have proper line lengths to prevent foamy pours. I wanted these so I could serve 4 volume sours on the same lines as a 2 volume beer and not have to keep a library of line lengths. Unfortunately, it doesn't work like that. Foamy pours unless the line length is sufficient. .

They are also a little shaky on the tap. My taps will shake around slightly with these installed.

That all being said. They do control the flow rate.
February 27, 2018
Purchased
over 6 years ago