Logo
 
MoreWineMaking!
  1. Home
  2. Equipment
  3. Temperature Control
MKII Temperature Controller
FE604
MKII Temperature Controller
MKII Temperature Controller
MKII Temperature Controller
MKII Temperature Controller
MKII Temperature Controller
 

MKII Temperature Controller

In Stock
Delivers to ( change ) by as part of our Fast & Free Shipping.
Faster Shipping Available. Details.
Returns
60 day no hassle return policy. Details
Description

The MKII temperature controller is a great way to control the temperature of your fermentation. Control both heating and cooling with two plugs on the back and create a temperature profile to step up or down the temperature over time. That ability to program in steps can be handy for wine fermentation or even storage if you want to lower or raise slowly. 

Features:

  • 0.1 degree accuracy
  • Dual plugs for simultaneous heating & cooling
  • -49°F to 248°F temperature range
  • Fully waterproof temperature probe
  • Programmable temperature profiles

Kegland Part number: KL01946

California Recipients: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
 
Item # FE604
Shipping Eligible for Free Shipping Program
Availability West - In Stock
East - In Stock
Weight 1 LBS
Customers Also Purchased

Viniflora® CH16 | Dry Malolactic Bacteria | 1.5 g
$34.99

Lallemand | LalVin VP41™ | Dry Malolactic Bacteria | 2.5 g
$38.99

pH Calibration Solutions (Set of 2)
$7.99

Ice for Liquid Yeast
$0.99

Lallemand | Go-Ferm Protect | Yeast Rehydration Nutrient
From $2.79 to $549.99

Vinmetrica - SO2 Reagent Kit for MT560 & MT570
$61.00

Ice & Insulated Mailer for Liquid Yeast
$4.99

Five Star | Star San Sanitizer | Acid-Based Sanitizer | High Foaming | Flavorless, Odorless, & Non-Toxic
From $17.99 to $2526.99

Lallemand | Enoferm Alpha™ | Dry Malolactic Bacteria
From $38.99 to $174.99

You Might Also Need
Community Q&A
Powered by Emplifi
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 2 answers
Why did you choose this?
MoreFlavor Store
Recommended by Ryan Gibbons of MIBCO
DAVID B. on Dec 5, 2022
To control the still, and shut it off when the tails start coming out.
Brian C on Feb 3, 2022
Recommended by Ryan Gibbons of MIBCO
DAVID B. on Dec 5, 2022
Good design and works well; the one I had finally died so this is a replacement unit
Douglas D on Aug 18, 2022
To control the still, and shut it off when the tails start coming out.
Brian C on Feb 3, 2022
Temp controller for my T500
John B on May 21, 2021
Solid control at a solid price
John W. Smith on Feb 11, 2021
Fermenting
Bob d on Oct 29, 2020
Slowly trying to get the parts for a keezer
JARED on Jun 9, 2020
Very cool need to get my fermentation temp dialed i
Jonathan I S on Jun 5, 2020
I will use to regulate the temperature of the chiller Glycol in my home-built Chiller system
Joshua C on May 21, 2020
Dual control heat/cool and replaceable temp unit. Also temp probe is metal.
Michael A on Jun 26, 2018
Works great lots of temperature options
Domingo T on May 24, 2018
Good design and works well; the one I had finally died so this is a replacement unit
Douglas D on Aug 18, 2022
Temp controller for my T500
John B on May 21, 2021
If there is a power loss, does this device resume timing where it left off or does the timing start over again?
Brian Y on Feb 10, 2021
BEST ANSWER: This device is made to resume the setting which was last used in the event of power failure.
What is the amp rating for this unit?
Paul W on Oct 14, 2018
BEST ANSWER: Hi Paul - 10 amps.
Will this fit in the Alcoengine Pot Still temp probe hole?
Brian on Feb 13, 2022
Reviews
Powered by Emplifi
4.2 / 5.0
5 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
1
0
1
0
Rated 2 out of 5
Useless for long ferm profiles
Does not correctly switch units from Celsius to Fahrenheit sometimes. Will be acting in Fahrenheit but displaying Celsiua. Can only be fixed by setting device back to C, then back to F, and then all set points and alarm values get converted from their value that was supposed to be F but was stored in memory as C. Super confusing and annoying to fix.

In the 12-step program mode, all steps must be same time duration. This makes it useless for programming a long ferm profile with holds and ramps of different durations, such as a lager ferm with primary ferm, diacetyl rest, crash, and lager steps.

Added 1 star because it holds a single set point without issue. But so does an Inkbird for less than half the price.
January 8, 2023
Purchased
 1 year ago
Rated 5 out of 5
Nice performance
Very good controlling temperature in ferm chamber, more than 2 years of constant use with no issues, will buy another one for kezzer.
February 12, 2019
Purchased
 over 6 years ago
Rated 4 out of 5
Good controller for keezer or fermentation.
Considering it's hard to find well put together prebuilt STC1000 controllers at the moment, this is a pretty good temperature controller. I would give 3.5 stars if I could. I had to calibrate the temperature controller, as it was reading about 2 degrees off. I have used for both a keezer and fermentation chamber. Looks better than an Inkbird in my opinion so I like using it for the keezer in my family room.
User submitted image
Added Jan 3, 2019
January 3, 2019
Purchased
 over 5 years ago
Rated 5 out of 5
Works great
Keeps my fermentation chamber at a steady temp.
March 29, 2018
Purchased
 over 6 years ago
Rated 5 out of 5
Easy to operate
Works fine. I'm currently using it to shut off a glycol chiller pump once the water being chilled hits 40 degrees. Then I'll use it to keep the fermentation temperature at 62 degrees.
February 11, 2018
Purchased
 over 6 years ago
 
  • CONNECT
  •
  • NEWSLETTER
    Sign up to receive exclusive deals, tips and tricks, special coupons and much more ...