Logo
 
MoreWineMaking!
  1. Home
  2. Tanks
  3. Fermentors under 60 Gallons
  4. Plastic Wine Fermenter
Bucket Fermenter With Spigot, Lid & Airlock - 7.9 Gallons (30 L)
FE357
Bucket Fermenter With Spigot, Lid & Airlock - 7.9 Gallons (30 L)
Bucket Fermenter With Spigot, Lid & Airlock - 7.9 Gallons (30 L)
Bucket Fermenter With Spigot, Lid & Airlock - 7.9 Gallons (30 L)
Bucket Fermenter With Spigot, Lid & Airlock - 7.9 Gallons (30 L)
Bucket Fermenter With Spigot, Lid & Airlock - 7.9 Gallons (30 L)
Bucket Fermenter With Spigot, Lid & Airlock - 7.9 Gallons (30 L)
 

Bucket Fermenter With Spigot, Lid & Airlock - 7.9 Gallons (30 L)

In Stock
Delivers to ( change ) by as part of our Fast & Free Shipping.
Faster Shipping Available. Details.
Returns
60 day no hassle return policy. Details
Description

The perfect fermenter for fermenting wine kits and sometimes preferred for beer fermentations because of its larger volume. This is a 7.9 gallon plastic fermenter complete with lid, airlock, and spigot. The rotating spigot allows you to push the bucket deeper into your counter or benchtop without obstruction. When it's time to transfer out, bring the bucket to the edge of your counter and rotate the spigot to point down. These buckets are made from Polypropylene.

Why Polypropylene?
These buckets are made from polypropylene as it is less porous and significantly smoother than other HDPE fermenters. HDPE is porous and can harbor microbial activity making it more difficult to clean and sanitize. Being less porous, polypropylene also does not absorb aroma like HDPE so there is less flavor carry over from batch to batch.

Kit Includes:

  • 7.9 gallon plastic bucket
  • Plastic lid with hole and grommet
  • Airlock
  • Spigot

Please note: The spigot hole comes pre-molded into the bucket and needs to be drilled out before installing the spigot. We recommend using a 5/8" drill bit and taking care not to strip the female threads that accept the spigot. The spigot includes a back nut that won't be needed—simply remove the back nut and thread in the spigot with the gasket in between the neck of the spigot and the bucket. The lid forms a very tight seal and requires a decent amount of downward force to lock in place.

 

Item # FE357
Shipping Eligible for Free Shipping Program
Availability California - In Stock
Pennsylvania - In Stock
Weight 3 LBS
Customers Also Purchased

Bottle Filler with Removable Spring (3/8 in.)
$3.99

The Wine Maker's Answer Book
$17.99

Line Brush - 1/2 in. x 48 in.
$8.99

22 ft³ Nitrogen Tank | Argon Tank | Aluminum
$99.99

6 Gallon Glass Carboy
$52.99

6 Gallon Bucket | Food Grade Plastic Fermenter | Volume Markings for 5 Gallons
$15.99

Airlock - 3 Piece
$2.99

Airlock - S-Shaped
$2.49

Universal Stopper With Hole
$1.49

Universal Stopper Solid
$1.49

Triple Scale Hydrometer
$7.99

Fermometer - Adhesive Thermometer
$3.79

Saint-Martin New Oak Barrel (French) - 110L (29gal) - Medium Long toast
$749.99

Barrel Rack for One 60 Gal Barrel
$229.99

Wine Cap Punch Down Tool (Small)
$24.99

Ferrari Wing Corker - Easy Corker
$29.99

WY4766 Cider Yeast - Wyeast
$10.99

Acid Test Kit
$12.99

Rubber Stopper - #7 Solid
$1.79

Rubber Stopper - #7 With Hole
$1.79

Twin Lever Wing Corker
$19.99

Barrel Rack for Balazs 112L Oak Barrel
$69.99

MKII Digital Pocket Probe Thermometer
$7.99

Community Q&A
Powered by TurnTo
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 10 questions Browse 10 questions and 31 answers
Why did you choose this?
MoreFlavor Store
this is my third one. they are just the right size for making the wine kits, and wanted to expand the number of batched that I can make at a time.
Bruce M on Feb 13, 2023
It should make the fermenting process easier
Goran G on Feb 6, 2023
this is my third one. they are just the right size for making the wine kits, and wanted to expand the number of batched that I can make at a time.
Bruce M on Feb 13, 2023
more fermenting buckets!
Michael H on Feb 11, 2023
It should make the fermenting process easier
Goran G on Feb 6, 2023
Making beer with my daughter for her wedding. We need more buckets!
Paul K on Feb 2, 2023
wanted
Kurt F. P on Dec 9, 2022
Have several, they work great
DAVID R J on Nov 21, 2022
for 6 gallon ales
David Brown on Oct 13, 2022
For volume plus convenience
John F on Sep 13, 2022
I am trying to learn to home brew
Russell W on Aug 24, 2022
I want it
Harles on Aug 23, 2022
Gives me extra room for my fruit bag
Carl J on Aug 19, 2022
I have one already and like the build
Douglas J. T on Aug 16, 2022
Size
David F on Jun 10, 2022
Need more fermentation space; wanted food grade
Jay G on Jun 9, 2022
For fermenting
Jean Macaraan on May 18, 2022
Extra volume, moulded handles instead of wire.
David W C on May 17, 2022
Started making wine
Susan Sabat G on May 14, 2022
Great size and price.
Jeff M on May 5, 2022
Price right
TACEY O M on Apr 6, 2022
For home use
Duane M on Mar 25, 2022
Homebrew
Valued C on Mar 24, 2022
Reviews
John F. Monaghan I on Mar 10, 2022
Perfect for fermentation with food grade materials
Troy A on Feb 15, 2022
Because
Steve K on Feb 15, 2022
Already use them. Great product and price.
Peter O on Feb 8, 2022
large, yet inexpensive
Rick T on Feb 2, 2022
It's good
Ron w on Jan 29, 2022
Good prices hoping for good value
Tracy B on Jan 27, 2022
Good price
Randall M on Jan 27, 2022
Good price and right size
Rich K on Jan 25, 2022
I need more fermenting buckets!
Alex C on Jan 22, 2022
i had one before and it was an amazing product that worked well
sean k on Jan 22, 2022
Convenient
David T on Jan 22, 2022
It works
John P on Dec 15, 2021
good deal for all 3 pieces
Thomas R on Dec 10, 2021
Need one
Don on Dec 1, 2021
better than the rest for this price
charles k on Dec 1, 2021
Convenient size for smaller batches.
Paul M on Nov 23, 2021
Holiday spirits
Ron on Nov 11, 2021
Good size for primary fermentation to go into 5 or 6 gal carboys.
Peter S on Nov 2, 2021
Hot sauce
Colin O on Oct 27, 2021
looks like will work for fermenting cabbage for sauerkraut
john on Oct 27, 2021
Need it
Javier M on Oct 23, 2021
Quality and price
Adrian M on Oct 11, 2021
Gift
Tatiana R on Oct 8, 2021
I need another fermenter and want the headspace.
Peyton raburn on Oct 8, 2021
Price
Bob T on Oct 8, 2021
To ferment wine and beer
Deb L T on Sep 30, 2021
Right size for my 5 gallon batch made from crushed grapes.
Roberta R on Sep 24, 2021
Wanted a transfer container.
Don Ray M on Sep 23, 2021
more fermenting buckets!
Michael H on Feb 11, 2023
Making beer with my daughter for her wedding. We need more buckets!
Paul K on Feb 2, 2023
how do you install the spigot?
Gabriel Meza on Apr 24, 2020
BEST ANSWER: To install the spigot you will need to punch out the small piece of plastic on the bucket that is inside the threading for the spigot. Then you will want to apply some thread tape and screw the spigot in until it doesn't leak.
How do you punch out the small piece of plastic on the bucket that is inside the threading for the spigot? A video would be helpful. Thanks.
Michelle Edwards on Jun 28, 2020
BEST ANSWER: I used a step drill for mine. If you use a regular twist drill bit, it can grab when it finishes going through the last bit of the hole and possibly crack the thin wall of plastic around it. The step drill has a much less aggressive angle to the cutting edge so there was very little grabbing finishing the hole.
What is the diameter and height?
Jason Shaffer on Jun 24, 2020
BEST ANSWER: The approximate dimensions are: 15.75" Wide x 16.25" Tall
Do the buckets now come uncut? My previous order had the holes already but but there were some jagged pieces left and I'm concerned that those are becoming breeding grounds for contamination.
James Jacobson on Aug 23, 2020
BEST ANSWER: The bucket I received a couple months ago did not have the hole cut for the spigot. Off topic and may not be an issue for most but I did have to use a rubber mallet to get a good seal when putting the top cover on.
what are the dimensions of the bucket?
Frederick Grothkopp on Aug 13, 2018
BEST ANSWER: Don't forget the lid! And then plan ahead for airlock! My measurements (with lid) and WITHOUT airlock were about 17" high, and 16.5" wide... I tend to err on the side of "too big measurements" when using this hand-measuring tape.
what is the part number for a replacement lid?
Jeff Dahlseid on Feb 15, 2020
BEST ANSWER: Hello Jeff, the part number is FE357B.
Lid for 7.9 gal Plastic Bucket (FE357A)
Lid for 7.9 gal Plastic Bucket (FE357A)
Does the circular lid include a gasket around the rim to be airtight?
Matt Telfer on Sep 28, 2021
BEST ANSWER: There is no gasket but it does form a tight seal.
is the 30 L bucket semi translucent, or opaque like many of the white HDPE buckets?
Frank Hruby on Mar 30, 2018
BEST ANSWER: This bucket is definitely semi-translucent. I am using mine at the moment, and I can easily see the level of the liquid through the wall of the bucket. I like the bucket, but I keep it covered to keep the light out.
What temperature is the bucket rated for? This is the 7.9 gal polypropylene bucket.
Leland Brooks on Feb 8, 2021
BEST ANSWER: The maximum recommended operating temperature for polypropylene is 180°F (82.2°C). Beyond this temperature, the performance values of the material may be compromised.
What is the part number for the replacement spigot?
Kenneth A R on Feb 4, 2020
Reviews
Powered by TurnTo
4.0 / 5.0
36 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
19
7
5
2
3
Rated 5 out of 5
good for proposal
bring the nipple and the air lock as well is a good option for beginners
February 14, 2023
Purchased
 5 months ago
Rated 5 out of 5
Love these, easy to clean, very stable on the shelf, holds over 7 gallons. I have 4 of them. Very fast service!
December 5, 2022
Purchased
 3 months ago
Rated 5 out of 5
Very Nice Fermenter
Fantastic fermenter! I love how you can still sort of see through it. Perfect for my mid-sized cider batches.
November 15, 2022
Purchased
 4 months ago
Rated 5 out of 5
Worth the money
Ordered this to put mash in. Arrived on time just as expected. Spigots are not predrilled but I typically do not use mine. Slightly see through which is a bonus. I like the thinner sidewalks as I heat externally too. Only downfall I can see if I wish they had screw top lids as these lids are quite hard to seal properly. All in all, These are well worth the money.
October 26, 2022
Purchased
 5 months ago
Rated 4 out of 5
Rough start. Assembly tips
Only 4 stars because of the difficulty with the lid and spigot assembly. I have not fermented yet, though it should go well.

There must have been some design changes with the spigot since the instructions and some comments were made.

I used a 1/2" drill for the spigot plug, but there is good flow.

There are 2 gaskets. one must be place on the bucket in the recess at the top of the hole. The other gasket must be placed on the spigot. Using only one gasket, the spigot
bottoms out too soon and will probably leak. Using both, I have no leaks and did not use teflon tape or any thread caulking. Also be careful not to cross thread the spigot.

I also thought the lid would not close tightly. I gave up trying and used bungees and weights to keep the lid on.

BUT

After inspecting the lid and the bucket rim, I found there is a latch and it cannot be closed all at once even when I placed it upside down and jumped on it!

This is what worked for me. Thinking of the lid as clock I put pressure with one hand at 6 o'clock until it snapped. Then with one knee, I kept pressure at 6 o'clock while pressing down with my hands on the left and right sides. I worked my way up to 12 o'clock. Then, checking from the sides, I looked for any high points and pressed those down. I tested it filled with with water and no leaks.

Letting the water drain out the spigot with my finger on the vent, water eventually slows as the vacuum inside increased.

Air tight and the spigot rotates 360 degrees at any time!

This should have enough head room for Krausen, I will be fermenting a 23 liter Ale.
October 15, 2022
Purchased
 5 months ago
Rated 2 out of 5
seal
Lid does not make an air tight seal, I had to use tape to seal it.
August 15, 2022
Purchased
 7 months ago
Rated 4 out of 5
Nice solid poly tank
The fermenter is fine for tinkering with small batches. The bottom spout is a nice feature but haven’t tried it yet. The only thing I didn’t like was the really cheap airlock. It works and all but it’s a cloudy kind of plastic and really cheap. I put my nice heavy duty clear one on and now all is good now. For $30 bucks it’s a good deal.Quick ship too!
June 28, 2022
Purchased
 9 months ago
Rated 4 out of 5
Spigot issues, but great overall.
I had to cut a small portion of the tip of the spigot, for bucket to sit level on counter surface.

I also had to wrap the threads with electrical tape (3 times around) in order to make a tight seal.

Otherwise, very pleased with size, durability, utility. Love the volume markings, extra room for fruit melomels.
In use, after slight adjustments.
In use, after slight adjustments.
April 4, 2022
Purchased
 12 months ago
Rated 3 out of 5
Bucket is good, lid is crap
The bucket is well made and I like the handles. I guess I will use it to store grain, because the lid is crap. Won't seal even after almost standing on it (200+ pounds). I can't use it as a fermenter.
March 1, 2022
Purchased
 1 year ago
Rated 5 out of 5
Great little Bucket
I didn't use the spigot , cause I just set on my workbench in the garage it's a little cool out there so I tape a seed bed warmer to it with a variable switch that I picked up online cheap
February 1, 2022
Purchased
 1 year ago
 
  • CONNECT
  •
  • NEWSLETTER
    Sign up to receive exclusive deals, tips and tricks, special coupons and much more ...