Logo
 
MoreWineMaking!
  1. Home
  2. Equipment
  3. Temperature Control
Ranco Digital Two-Stage Temperature Controller - Wired
FE602
Ranco Digital Two-Stage Temperature Controller - Wired
Ranco Digital Two-Stage Temperature Controller - Wired
 

Ranco Digital Two-Stage Temperature Controller - Wired

In Stock
Delivers to ( change ) by as part of our Fast & Free Shipping.
Faster Shipping Available. Details.
Returns
60 day no hassle return policy. Details
Description

Now you can easily control two different temperature regulating devices. This all new, two-stage controller comes pre-wired with dual AC outlets. One outlet is controlled by one relay, the other by a second relay. The most common application is to use one stage to heat and the other to cool. This means you can simultaneously control a heater and a cooling device, never having to manually switch between heating and cooling modes.

The included sensor probe monitors the temperature while the digital readout displays it in either Fahrenheit or Celsius. The sensor probe is 1/4 in diameter and works well with the Stopper or Coupler Thermowells. Temperature Range of -30 to 220F. 

Ranco base Model # ETC-112000-000. 
 
This controller has two sets of contacts the Normally Open contact is rated at:
  • 115 Volts 208/240 Volts
  • Full-Load Amps 16 Amps 8 Amps
  • Locked Rotor Amps 96 Amps 48 Amps
  • Ressistive Amps 15 Amps 8 Amps
  • Horsepower 1 hp 1 hp
The Normally Closed contact is rated at:
  • 115 Volts 208/240 Volts
  • Full-Load Amps 5.8 Amps 2.9 Amps
  • Locked Rotor Amps 34.8 Amps 17.4 Amps
  • Ressistive Amps 5.8 Amps 2.9 Amps
  • Horsepower 1/4 hp 1/4 hp
 
California Recipients: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
 
Item # FE602
Shipping Eligible for Free Shipping Program
Availability California - In Stock
Pennsylvania - In Stock
Weight 2 LBS
Customers Also Purchased

Viniflora® CH16 | Dry Malolactic Bacteria | 1.5 g
$34.99

Lallemand | LalVin VP41™ | Dry Malolactic Bacteria | 2.5 g
$38.99

Wyeast | 4007 Malolactic Blend | Liquid Malolactic Bacteria | 125mL
$10.99

pH Calibration Solutions (Set of 2)
$7.99

Ice for Liquid Yeast
$0.99

Lallemand | Go-Ferm Protect | Yeast Rehydration Nutrient
From $2.79 to $549.99

Vinmetrica - SO2 Reagent Kit for MT560 & MT570
$59.00

Ice & Insulated Mailer for Liquid Yeast
$4.99

Five Star | Star San Sanitizer | Acid-Based Sanitizer | High Foaming | Flavorless, Odorless, & Non-Toxic
From $17.99 to $2624.99

You Might Also Need
Community Q&A
Powered by TurnTo
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 3 answers
Why did you choose this?
MoreFlavor Store
Replacement part for heated and cooled fermenter
Charles H on Sep 14, 2022
Making a fermentation chamber
Bryan s on Sep 18, 2019
Replacement part for heated and cooled fermenter
Charles H on Sep 14, 2022
I already have 5 one stage ones for heating, but wanted a two stage one for cooling and heating.
Kenneth S on Nov 17, 2021
Making a fermentation chamber
Bryan s on Sep 18, 2019
Need another one for my fermentation freezer. Have one for my keezer that works great
Valued C on Aug 28, 2019
have one already and it has worked well.
Thomas L on Mar 8, 2019
Old one gets stuck and doesn't maintain the right temperature
Robert M on Jan 29, 2019
to control temperature in my fridge. It came recommended
brian m on Dec 11, 2018
My current controller no longer works
Bill V on Sep 18, 2018
Need to ferment at an exact temp
T D on Aug 22, 2018
Replacement for a broken one.
Sean G on Feb 12, 2018
I already have 5 one stage ones for heating, but wanted a two stage one for cooling and heating.
Kenneth S on Nov 17, 2021
Need another one for my fermentation freezer. Have one for my keezer that works great
Valued C on Aug 28, 2019
I've set me 2 stage ranco to 67 with 2 degree diff cooling for stage 1, then 64 with 2 degree diff heating for stage 2. The temp probe is 74 degrees. Seems like only the cooling receptacle should be on. right.? Both the heating and cooling receptacles on my controller have power. why would the heating and cooling circuits be on at the same time?
Gregory Hendricker on Apr 23, 2021
BEST ANSWER: You are correct that only the first stage should be active with your settings the way they are. First thing to check is if the unit 'wants' to send out the power; the display will show "S1" and "S2" which correspond to the outlets. While "S1" and/or "S2" are visible that means the brain is sending power to the outlets. It sometimes will happen that the controller itself is wired backwards; if that's the case we can work out an exchange. If you change the setting in stage 2 from "H" to "C" does the outlet lose power?

If the display is showing that only S1 is on but both outlets have power then you could double check that the wiring inside the outlets is correct. The two sides can share a negative and ground wire, but the hot wires should be distinct. If they are sharing a hot wire then both outlets will receive power when any one of them is supposed to.
Reviews
Powered by TurnTo
4.1 / 5.0
8 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
5
1
1
0
1
Rated 5 out of 5
Updated and upgraded
New is nice. This has features my previous Ranco 2 stage didn’t. It has a backlight for the display and now a short cycle delay

I was sad one died after 5 years but I’m very happy with the replacement
September 12, 2020
Purchased
 over 3 years ago
Rated 3 out of 5
This is the second unit I’ve purchased. The first one only lasted a little under two years and then began showing error code. The instructions basically said to replace it. Could it be repaired, who knows. So I purchased another one so far it has worked as advertised. We’ll see. This is an expensive unit and only getting two years out of it is disappointing
February 23, 2020
Purchased
 over 4 years ago
Rated 5 out of 5
Plug n play, no wiring required, simple display
October 10, 2019
Purchased
 over 4 years ago
Rated 5 out of 5
Works perfect. Exactly how advertised.
February 21, 2019
Purchased
 over 5 years ago
Rated 1 out of 5
Fails after a couple of years.
This product is a piece of junk. This is the second one I've had that has stopped working. Neither the cooling or heating side works anymore. Came out to check on my beer today and it was totally frozen. This product is way to expensive for it to fail after a couple of years.
November 4, 2018
Response from MoreFlavor
Hi John - Apologies for causing an inadvertent Eis Bock. Please give us a call at 1-800-600-0033 or email us at info@moreflavor.com so that we can assist you. We are here to help. Cheers!
November 5, 2018
Zach R Staff
Rated 4 out of 5
decent product but excellent customer service
I had the previous version of this unit (ETC-211000-000) for 2 years. The relay for the cooling outlet just went out. When I called and asked for a replacement or refund I was initially told no. When I pushed the request up the ladder, and explained the circumstances and problem they sent me a new unit in 3 days. This kind of customer service is what will keep me coming back to MoreBeer for purchases, even if not all the products are superb.
September 28, 2018
Rated 5 out of 5
Great for large volumes
When fermenting larger volumes this Ranco controls more precise than others I tried.
February 6, 2018
Purchased
 over 6 years ago
Rated 5 out of 5
I LIKE IT
I recommend this dig. control. I have used this for my refer./fermenter box for a couple of years. proper temp control has made a big difference in my finished beer. Easy to instal and operate.
July 29, 2017
 
  • CONNECT
  •
  • NEWSLETTER
    Sign up to receive exclusive deals, tips and tricks, special coupons and much more ...