Fill-O-Meter - Water Measuring Flow Meter Device

Fill-O-Meter - Water Measuring Flow Meter Device

In Stock
Delivers to ( change ) by as part of our Fast & Free Shipping.
Faster Shipping Available. Details.
60 day no hassle return policy. Details

No More Spillovers! Unlike other tap timers that simply measure time, this Fill-O-Meter measures volume of water and will automatically turn off when the specific volume of water is dispensed.

We recommend setting up the Fill-O-Meter with either Duotight fittings or Type A Camlocks. Thread tape will be required for the Camlock. Use sparingly as too much plumber's tape can damage the plastic thread. And it is very important to never overtighten! 

  • Displays real time flow rate and volume (Liters/Min or Gallons/Min)
  • Accurately measures and controls volumes at flow rates from 1-30L/Min (0.26-7.9Gal/Min)
  • Never overfill or spillover again
  • Splash resistant housing
  • Great for filling pools, tanks, brewery hardware, distilling gear, mixing liquid and many other applications
  • Integrated flow meter and solenoid valve
  • Illuminated display for usage in the evening
  • Integrated sound alarm
  • Easy 1/2" BSP Inlet and Outlet
  • Automatic failsafe - flow is stopped if the unit loses power

Important Notes:
DO NOT flow liquid the wrong direction, it will break the unit.
DO NOT overtighten fittings onto the 1/2" ports.
DO NOT exceed temperatures greater than 40°C through the unit.

  • Flow Range: 1-30L per minute
  • Temperature Range 0°C to 40°C 
  • LCD: 3 inch back lit display
  • Housing Material: ABS
  • Input/Output threads: BSP 1/2"
  • Pressure Rating: 0-12bar (0-180psi)
  • Accuracy: +/- 5%

Please Note: Accuracy can be improved with stable flow. Repeated start/stop or variation in water supply can have negative effect on accuracy. If you are noticing innaccurate fill levels, see the instruction manual for calibration instructions.

KegLand Part Number: KL14694

Item # BE671
Shipping Eligible for Free Shipping Program
Availability California - In Stock
Pennsylvania - In Stock
Weight 2 LBS

Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 9 answers
Why did you choose this?
MoreFlavor Store
Looking to prevent water over fill
Jennifer B on Aug 12, 2021
Features we wanted and ease of mounting the unit.
Paul Van H on Apr 24, 2021
Looking to prevent water over fill
Jennifer B on Aug 12, 2021
i want to not worry about over filling
Roger K on May 14, 2021
Features we wanted and ease of mounting the unit.
Paul Van H on Apr 24, 2021
Tired of measuring my water with jugs.
PAUL L. on Jan 6, 2021
It was on my don Christmas list. He's a very good beer maker and has a 2nd place win at the CA state fair. He's also a chemist.
Gertrude K on Jan 1, 2021
Read about it in Zymurgy Magazine
Jeffry Battles on Jan 1, 2021
New gadget for the brewery
Brian K on Jan 1, 2021
Easy to measure strike water
John M on Dec 31, 2020
i want to not worry about over filling
Roger K on May 14, 2021
Tired of measuring my water with jugs.
PAUL L. on Jan 6, 2021
Will this work with the BrewRO System?
Scott Holtog on Jan 24, 2021
BEST ANSWER: The minimum flow rate required to measure accurately is 1L (0.26 gal) per minute. If your RO water is flowing slower than that it will not work accurately.

3.6 / 5.0
5 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Rated 5 out of 5
Saves time and money on production and cleanup. Was concerned if would work with RO but works great
Well worth being able to fill a 3 gallon container and not sitting while it fills up. Can go do other stuff and not worry its over flowing. I use it with a RO system for making my brew so had to goto kegland site to get directions that would download to an IPhone to calibrate flow x 10. Morebeer directions wouldn’t work was pdf. Once adjusted works like a champ saves time and cleanup from over filling. Haven’t seen a temp reading yet but not worried about that yet
My RO system
My RO system
May 5, 2021
4 months ago
Rated 3 out of 5
Great Bang For the Buck, BUT
I have tested two off these units, and passed over one thousand gallons through them, getting the same results (testing in both using gallons and Liters - I use gallons). I also ran a commercial $750 digital water meter in-line with this unit in order to verify my results.

Positive things that I found:
- Once calibrated, the "set water to be delivered" came within plus or minus 1% of the set value (for a $100 product - very impressive!).
- No battery required, and memory saves previous settings during a power failure.

Problems that takes it down to three stars:
-"Temperature" always displays "000 c" - doesn't work
- "Instantaneous Value" displays numbers that are not even close to the actual flow rate.
- Calibration requires a commercial digital water meter, or a precision volume measuring device. Calibration "K-Factor" comes set at "9.4", not close (no instructions on a calculation method) to what you will end up with (mine was 35.76). It is all trial and error, and requires a lot of trials to find the best calibration "K-Factor" number.
- The 1% accuracy can only be achieved if there is a good quality pressure regulator in front of the "FILL-O-METER".
- the inlet and outlet is a British Standard Pipe thread (similar to 1/2" pipe thread, but is a straight thread, and uses a rubber 0-ring to make the fitting not leak). It would be nice if the manufacture provided connection fittings.

In conclusion:
- More Beer customer service was top notch! They sent an exchange replacement immediately with a return label for the first one. They offered a full refund if I wanted to return the second unit as well - They were great!
- Once calibrated, I can set my desired fill, hit start, and walk away.
- This device falls well short of what it is supposed to do, but I decided to keep it, because for $100, you can not go wrong, and it is well worth it.
March 17, 2021
Rated 1 out of 5
Does not measure water accurately
First off, I want to say the the More Beer staff has been extremely helpful in trying to help me get this product to work correctly. They even sent me a replacement unit at no charge to me without hesitation. At first I was convinced that I was not setting this up properly; however, no matter what I tried, this would not dispense the correct amount of water. Across two different units, it would not work as advertised. I tried setting it the units to Liters and tried to use a conversion from gallons to have it measure the volume correctly, but it still did not work. It wouldn't even dispense 1 Liter correctly; it always came up short. Save your money until Kegland can fix the problems with this product.
February 15, 2021
8 months ago
Response from MoreFlavor
So sorry to hear about your experience. Thank you so much for your feedback. We really appreciate the honesty and value responses like this as it helps us improve our products. We try very hard to create the best experience for our customers and provide quality products. For any questions or concerns you can reach out to our customer service team or return the item by scrolling to the bottom, right-side of our web page and following the appropriate link. We are here to help. Cheers!
February 20, 2021
Malcolm lieban
Rated 4 out of 5
Works great in liter mode
I love it with the exception that I can only use in in liter mode. When I put it in gallon mode I only get about 2 qts per 5 gallons before it shuts off. I returned the first one, got the 2nd one and it works only in liter mode that is saturate. I'm keeping it and using it by converting gallons to liters
Would be helpful if they provided a detailed instruction on how to get the gallon function to work correctly No fault of morebeer, they were very very helpful.
January 27, 2021
8 months ago
Rated 5 out of 5
All I do now is put the hose in the tank punch in the amount of gallons I need and walk away.
The unit is very good, it had to be recalibrated when I changed measurements from liters to gallons.
January 14, 2021
8 months ago