Logo
 
MoreWineMaking!
Filter Canister Housing - 10 in.
FIL32A

Filter Canister Housing - 10 in.

In Stock
Delivers to ( change ) by as part of our Fast & Free Shipping.
Faster Shipping Available. Details.
Returns
60 day no hassle return policy. Details
Description

This is just the 10" Housing found on the 10" Filter Kit. It has 1/2" FPT on both the "in" and "out" of the housing. This can be "ganged" on to the FIL40 with the help of a 1/2" stainless nipple, H610.

For Filter Cartridges, see our line of BevBright® Filters.

Please Note: This housing is for 10" filter cartridges.  Many cartridge filters are 9.785" long, and will allow some bypass if used with this housing.

If you are having trouble removing the lid, try this spanner wrench!

Item # FIL32A
Shipping Eligible for Free Shipping Program
Availability In Stock
Weight 2 LBS
Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
Why did you choose this?
MoreFlavor Store
Filtering a hard seltzer
Andrew A on Aug 4, 2020
Have an older one. Still works! Sturdy. Easy to rebuild with new o-ring. Adding one under sink.
Daryl C on Jul 10, 2019
Filtering a hard seltzer
Andrew A on Aug 4, 2020
Replacement for broken unit
Rex G on May 26, 2020
Have an older one. Still works! Sturdy. Easy to rebuild with new o-ring. Adding one under sink.
Daryl C on Jul 10, 2019
Replacement for current one
Daniel C on Dec 6, 2018
Filtering out yeast from hard cider. Morebeer.com had the best price and fastest shipping.
Scott B on Oct 11, 2018
pre filter for for wine filtering
Michael F on Sep 5, 2018
Inexpensive quality filtering option
William A on May 28, 2018
affordable
Aaron S on Feb 23, 2018
recommendations from Xpressfill
Traxler L on Feb 8, 2018
Replacement for broken unit
Rex G on May 26, 2020
Replacement for current one
Daniel C on Dec 6, 2018
Any issue using this as a fitting for the 10" water filter? I have chlorinated water and was concerned about degrading the fitting
Ross Sigworth on Sep 3, 2020
Filter Canister Housing - 10 in.
Filter Canister Housing - 10 in.
Duotight Push-In Fitting - 8 mm (5/16 in.) x 1/4 in. BSP
Duotight Push-In Fitting - 8 mm (5/16 in.) x 1/4 in. BSP
BEST ANSWER: The fitting won’t have any issue with it for degradation, but there is a minor concern with it for design. First, the threads are not directly compatible. You’ll need a reducer bushing threaded 1/2” male NPT on the outside and 1/4” female NPT on the inside. Plastic recommended, get some good pipe tape like Blue Monster. Use three wraps, and be careful not to cross-thread it. The Duotight fitting is BSP, not NPT, though they are theoretically compatible. As it is a straight thread instead of a taper, the rubber sealing gasket at the base provides the seal, instead of the interface of the tapered pipe threads. You may need a small amount of pipe tape, but try it without first, you may get a good seal on your first shot.

Good luck, I’m really happy with these Duotight fittings, and am gradually getting rid of everything else.
Reviews

3.7 / 5.0
10 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
6
1
0
0
3
Rated 5 out of 5
Perfect solution for filtered water in the garage
I found this when looking for an inexpensive way to filter water for brewing in the garage. I also purchased the carbon filter (separately), and some quick connects (1/2" NPT threads, from Brewer's Hardware). Now I can connect it directly to my garage sink and have clean water without having to haul it from the kitchen upstairs. The flow rate is only slightly below the full rate of the sink, so I can fill an 8 gallon tank very quickly.
October 5, 2022
Purchased
over 2 years ago
Rated 4 out of 5
Works just fine
I wish the threaded ports were metal instead of plastic because I think over time this will wear out and eventually break but the rest of the housing is solid and works as advertised.

Used this to filter gelatin out of a beer and a hard seltzer I was clarifying and it works great. Both came out clear.
August 26, 2020
Purchased
over 4 years ago
Rated 1 out of 5
IT STILL LEAKS
Bought and installed. Ran new PEX line to filter. Fortunately, installed valve which I needed when the filter leaked where canister joins housing.

I ordered a second canister because I thought I may have damaged the original. New canister leaked in same place. More flavor was helpful on phone and sent silicone sealer and offered to refund. So far, sealant hasn't stopped leak.

I will disassemble and reassemble with plenty of silicone sealer and see if that works.
April 5, 2020
Purchased
over 4 years ago
Response from MoreFlavor
Andy - Try not to over-tighten and this should be leak free.
April 29, 2020
Zach R Staff
Rated 5 out of 5
The filter was easy to hook up I attached it to my two barrel fermenter with TC fittings and I use it to filters the beer prior to kegging
User submitted image
User submitted image
October 28, 2019
Purchased
over 5 years ago
Rated 5 out of 5
Effective, very easy to use!
August 6, 2019
Purchased
over 5 years ago
Rated 1 out of 5
not impressed to far..
one use, gasket broke...
July 22, 2018
Purchased
over 6 years ago
Response from MoreFlavor
Hey so sorry about your experience. We try very hard to create the best experience for our customers and provide quality products. Please give us a call at 1-800-600-0033 or email us at info@moreflavor.com so that we can assist you. We are here to help. Cheers!
July 31, 2018
Zach R Staff
Rated 1 out of 5
horribly leaky! Get ready for >20% loss.
the o-ring doesn't seal at all, so be prepared to lose a gallon or more of beer for 5G transfer. The thread is non-repeating so the o-ring will get pinched at some spot no matter how well you align it or how well you tighten it. I did several transfers and really tried hard to tighten the plastic top as hard as I could, but it is still leaky as hell.
June 18, 2018
Response from MoreFlavor
Hi Oleg - Typically with these household water filters, the harder you tighten them the more they will leak. Try hand tightening, and then a little extra, also a good idea to add some CIP film to the O-Ring.
June 19, 2018
Zach R Staff
Rated 5 out of 5
Fantastic. This will help me in my small operation with limited space.
January 17, 2018
Purchased
over 6 years ago
Rated 5 out of 5
Seals fine, remember to buy attachments
This is just a big plastic cannister - filter block sold separately. Also remember that this thing has 1/2" FPT connectors, so don't forget to add two more quick-connect devices of your favorite type to your order.

I've been using mine for about a year or so, fairly regularly, as part of my pre-brew water treatment plan. I have chloramine-treated city water, and have been told that running slowly through a carbon-block filter will get rid of most of that, plus my downstairs water tap sometimes spits out rust (rental housing, what can you do?), so this helps on both fronts. The O-ring still seals well, the only drips I ever get are when I forget to seat my quick disconnect hose properly (or if I forget to open the valve on my brew kettle before I turn on the water-- woops!).

It's solid and durable enough to put up with mistreatment. Mine's usually flopped around, loose, between my sink and brewpot, so it falls over all the time.
May 1, 2013
Rated 5 out of 5
Durable
Works well. I use two inline to filter my water. I smashed an oring once by being careless, but have never had any other problems.
May 1, 2013