MoreFlavor!® Gas Transfer Tool

MoreFlavor!® Gas Transfer Tool

60 day no hassle return policy. Details

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in mid November.

Transfer wine out of a barrel using inert gas to reduce oxidization with our Gas Transfer Tool. After using most all similar tools on the market, we took what we liked and disliked and made our own. Obviously we love the price!... but perhaps more impressive is the polished finish and the excellent quality welds. We sell it without a sight-gauge welded in or attached. We found it easier to clean without a welded in place sight-gauge. We also found that most wineries already had other sight-gauges in the winery and did not need it included. Of course it is available as an option, (sight-gauge H664, clamp H652, gasket, h656.) Replacement gaskets and parts in stock and available.  

Quality Features

  • Stainless lock down mechanism to adjust height
  • Polished stainless tube
  • Compression Silicone Bung to form airtight seal with barrel
  • Adjustable lees pin
  • Made from 304 stainless steel

  • 1.5" Tri-Clover Outlet
  • 1/4" Stainless Steel Ball Valve with FPT inlet for inert gas
  • 31" height from lees pin to pictured stopper
Prebook Item: Please note this item is not currently in stock, but is available for Pre-Order. We do require payment in full in order to reserve stock.
Item # R657
Weight 9 LBS
Community Q&A

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 7 questions Browse 7 questions and 68 answers
Why did you choose this?
MoreFlavor Store
Because it works well
William O on Aug 27, 2021
Justin K on May 28, 2021
Because it works well
William O on Aug 27, 2021
i have barrels
Les M on Jul 10, 2021
Justin K on May 28, 2021
Used on my friend has at his brewery and it works great
Raymond A P on May 19, 2021
Price and availability.
Adam B on Apr 21, 2021
had one at previous cidery, affordable and practical
Abram G on Apr 21, 2021
Best Price!!
Matthew H O on Jan 11, 2021
It works good
Dave H on Dec 30, 2020
To get beer out of a 59 gallon wine barrel.
marcus h on Dec 24, 2020
We need this tool for the brewery.
M. Ty M on Nov 11, 2020
Cheaper than GW Kent
Nate S on Nov 8, 2020
quality and price
Wayne B on Sep 18, 2020
Gentle way to handle delicate wines
Michelle U on Aug 22, 2020
new to barrel aging. hope this helps
Emmett S on Aug 21, 2020
It is the industry standard for barrel transfers.
Donald Durant J on Jun 10, 2020
.....to move beer
Josh W on May 22, 2020
barrel aging program
Xavier A on May 13, 2020
Looks like a great deal compared to what local winery supply shops charge
Aaron P on Mar 19, 2020
It's a reliable, inexpensive and effective tool in transferring liquid from barrel to tank, or vice versa.
Patrick R on Jan 31, 2020
IAN P D on Dec 5, 2019
Tried to make our own, but this was recommended by a fellow brewer.
Anthony H on Nov 30, 2019
matt m on Nov 5, 2019
Better price than the competitor and has great reviews.
Matt R on Oct 23, 2019
Transfer barrel aged beers.
Nigel D D on Oct 16, 2019
Old one stuck and can’t be taken apart.
Alibi Ale W on Sep 25, 2019
easier than tipping a barrel to empty it
Travis H on Sep 9, 2019
cheaper than gw kent
Molly F on Sep 7, 2019
Because it is cheaper than the Bulldog
Mattthew U on Aug 28, 2019
Used it at a previous job
Christian L on Aug 28, 2019
Fits need
Todd G on Jul 12, 2019
More economical than other alternatives in the market.
Dustin S on Jun 20, 2019
It is a great tool at a great price!
Christian P on May 24, 2019
best price
michael n on May 10, 2019
Cheaper then bulldog
Ted P on Apr 14, 2019
I need it.
Alex P on Apr 6, 2019
Beer barrels baby
Patrick H T on Mar 28, 2019
well priced and well reviewed from personal friends
Matt D on Mar 25, 2019
Better price than GW Kent
Dallas W on Mar 16, 2019
I was unable to select an Australian state in the drop down menu - these items need to be sent to Tasmania please.
Colette M. G on Feb 15, 2019
Comments on Pro Brewer site
Charles B on Feb 4, 2019
josh e on Jan 24, 2019
Good reviews online and cheaper option than a bulldog.
C j P on Jan 22, 2019
Cheaper than GW Kent
Jason B on Jan 19, 2019
didn't want to pay the money for the GWKent version
Matthew H on Jan 17, 2019
need it
Hugues T on Jan 12, 2019
it was the cheapest one I could find
Jonathan M on Jan 10, 2019
We have a growing Barrel project at my brewery and am tried of borrowing a friends.
James W on Jan 9, 2019
Because we to barrel age beer
Christopher J L on Dec 20, 2018
Thomas T on Dec 15, 2018
Barrel filling
Joel C on Dec 8, 2018
i have barrels
Les M on Jul 10, 2021
Used on my friend has at his brewery and it works great
Raymond A P on May 19, 2021
is this height adjustable to fit any size barrel? I have several 5 and 10 gallon barrels i need it for. HELP!
Francisco Ramos on Jan 18, 2018
BEST ANSWER: Yes, not only does it have an adjustable lees pin at the bottom but the whole valve and bung assembly can be adjusted along the whole length of the racking cane to accommodate various size barrels.
I have several stainless kegs (old firestones) that take a #10 stopper. Any idea if the stopper will fit this sized keg?
Mark Parker on Mar 7, 2018
BEST ANSWER: I'm not sure what a #10 stopper dimensions are. The small end of this one is 1.75 inches. At the top its closer to 2.25 inches. It expands to seal the bung hole when you turn the lower screw handle right above the rubber stopper. I would say if the hole in your keg is about 2 inches this will work.
What is the recommended CO2 pressure? Looks like it has a PRV.
T I on Feb 1, 2019
BEST ANSWER: The PRV on this is rated to 55 psi. All of the other answers are correct that you really just need a little bit of pressure to push your product out of the barrel. Then when you're finished you can either relieve the pressure with the PRV.
How do you clean the assembly? I cannot locate an instruction manual.
T I on Feb 1, 2019
BEST ANSWER: I run PBW through it for 20 minutes or so: put PBW + water in the boil kettle, hook the BK outlet to the outlet of the cane and put the whole thing in the BK so the solution flows through the cane, out of the BK, back into the top of the cane and out of the bottom again.
Does this tool pressurize the tank being transferred from the top or the bottom? I’m concerned about disturbing the lees at the bottom of the tank during transfer if the gas comes out the bottom of the tool.
Shawn wichman on Oct 14, 2018
BEST ANSWER: I use one of these in my home winery. It pressurizes from the top (where the rubber seal is) and presses liquid up from the bottom. You have to set the little screw in the bottom to lift the liquid pipe off the bottom of barrel so you don't push up lees that are on the bottom. Works great.
What is the maximum vessel depth achievable if the stopper is pushed as high as it will go? I am looking to transfer apple juice for cider from a 275 gallon IBC tote which measures about 38" from the lid to bottom of the tote. I may need to extend the tube so it reaches the bottom. If so, what is the outer diameter of the stainless tube?
Nico Chiarito on Nov 28, 2020
BEST ANSWER: I just measured that maximum vertical distance as about 33.5”, maybe a bit more. The outer diameter of the stainless tube is 1 7/64”, or just under an inch and an eighth, as measured with a digital caliper. Hope this helps.

4.7 / 5.0
24 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Rated 5 out of 5
Great service excellent customer service
September 2, 2021
2 months ago
Rated 5 out of 5
Great tool
Quality tool at a great price. Much more affordable than the other bull dogs on the market.
August 14, 2021
3 months ago
Rated 5 out of 5
Nicely done
Well made and price is right
June 4, 2021
5 months ago
Rated 4 out of 5
Basic and Works
Transfers beers in and out of barrels.
June 3, 2021
6 months ago
Rated 5 out of 5
Works great, glad to finally be able to fill barrels. Looking forward to emptying them when the cider's ready!
May 10, 2021
6 months ago
Rated 5 out of 5
Works great!
Works great for transferring from a barrel at a fraction of the cost of some of the others out there.
March 3, 2021
over 2 years ago
Rated 5 out of 5
Cheaper than and comparable to other brands
So far so good. This bad boy is the bees knees, we used it to transfer a mixed ferm that spent 19 months in the barrel, straight to the keg. The ability to remove all the soft parts is monumental in keeping peace of mind between mixed ferm and regular batches.
User submitted image
Added Nov 10, 2020
November 10, 2020
1 year ago
Rated 5 out of 5
great tool for low cost compared to other brands
great tool for low cost compared to other brands
March 12, 2020
over 3 years ago
Rated 4 out of 5
Great Product, Small Design Flaws, Initial Quality Problems Though
I love this machine! However, we had to do a lot of disassembly and cleaning of the machined threads to get it to work. They were completely frozen and galling up the works when we first tried to use the thing.

They should have made a bit more space to slide the collar up for good access to the threads for cleaning. The nitrogen tube is too close to the collar. Also, the silicone bung was dirty and had some marks on it like it has been used before.

All that said it really has a nice quality look and feel. We were able to flush out the threaded areas with lots of cleaner and water and soap and now everything screws together nicely.
September 15, 2019
over 2 years ago
Rated 5 out of 5
Simple and effective. Great $
Simple and effective. Works as well or better than one we purchased for more $ from a different company.
July 26, 2019
over 2 years ago