Logo
 
MoreWineMaking!
  1. Home
  2. Tanks
  3. Fermentors under 60 Gallons
  4. Speidel Plastic Tanks
Stainless Dip Tube for Speidel Plastic Fermenters
FE740
Stainless Dip Tube for Speidel Plastic Fermenters
Stainless Dip Tube for Speidel Plastic Fermenters
Stainless Dip Tube for Speidel Plastic Fermenters
Stainless Dip Tube for Speidel Plastic Fermenters
Stainless Dip Tube for Speidel Plastic Fermenters
 

Stainless Dip Tube for Speidel Plastic Fermenters

In Stock
Delivers to ( change ) by as part of our Fast & Free Shipping.
Faster Shipping Available. Details.
Returns
60 day no hassle return policy. Details
Description

Stainless dip tube for Speidel plastic fermenters. Replace your spigot with this dip tube along with a ball valve for a nice spigot upgrade. The 1/2 in. NPT connection can also be used for other attachments such as, quick disconnects, camlock components, or tri clamp. The dip tube uses the stock speidel spigot lock ring and gasket.

Item # FE740
Shipping Eligible for Free Shipping Program
Availability West - In Stock
East - In Stock
Weight 1 LBS
Customers Also Purchased

Premium Breathable Silicone Carboy Hood
$15.99

Replacement Rubber Airlock Stopper for Speidel Plastic Fermenters
$4.49

Replacement Airlock for Speidel Plastic Fermenters
$5.99

Wyeast | 4007 Malolactic Blend | Liquid Malolactic Bacteria | 125mL
$13.99

Airlock - 3 Piece
$2.99

Stainless Ball Valve - 1/2" Full Port
$15.99

Stainless - 1/2 in. MPT x 3/8 in. Barb (1/4 in. ID)
$5.99

Plastic Syringe | 10 mL | Center Nozzle
$2.19

Lallemand | Go-Ferm Protect | Yeast Rehydration Nutrient
From $2.79 to $549.99

Replacement Locking Cap for Speidel Plastic Fermenters and Tank Airlocks
$4.99

Stainless Spigot for Speidel Plastic Fermenters
$27.99

BrewBuilt® Stainless Ball Valve | 1/2" Locking Full Port
$14.99

Stainless Dip Tube & Thermowell for Speidel Plastic Fermenters
$39.99

Stainless 1/2 in. Coupling for Speidel Plastic Fermenters
$19.99

Grommeted Airlock Cap for Speidel Plastic Fermenters
$7.99

Silicone Gasket for Speidel Plastic Tank Adapters
$3.89

Replacement Lock Nut for Speidel Fermenters
$6.99

You Might Also Need
Community Q&A
Powered by Emplifi
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 5 questions Browse 5 questions and 16 answers
Why did you choose this?
MoreFlavor Store
to replace the factory
Mark G on Apr 15, 2022
More control over transfer from fermenter to keg
Steve C on Feb 11, 2020
to replace the factory
Mark G on Apr 15, 2022
Wrks great but I found on the 120ltr unit I loss 4 liters
Kenneth G on Dec 1, 2020
More control over transfer from fermenter to keg
Steve C on Feb 11, 2020
maximize the amount of beer per batch
Salvatore F on Mar 22, 2019
Everything else I have uses ball locks and quick connects
Valued C on Nov 17, 2018
Replacing SS Brewtech Valve | ⅜” 2 pc with Racking Arm, which leaks through the valve (very disappointed with the ss brewtech valve)
Andy L on Oct 2, 2018
To make the use of the Speidels more efficient
Ryan W on Sep 1, 2018
to facilitate fluid movement using pumps
Barry P on Apr 20, 2018
easy transfer to keg from fermenter
GrdgG. on Apr 4, 2018
Top avoid tipping fermenter when transferring or bottling .
James van E on Mar 6, 2018
To upgrade my speidel fermenter
Michael F on Feb 12, 2018
Upgrading Speidel fermenters
Jack K on Jan 29, 2018
Wrks great but I found on the 120ltr unit I loss 4 liters
Kenneth G on Dec 1, 2020
maximize the amount of beer per batch
Salvatore F on Mar 22, 2019
Would it work with the 3.5gal version of fermenter?
Marien G on Oct 21, 2019
Stainless Dip Tube for Speidel Plastic Fermenters
Stainless Dip Tube for Speidel Plastic Fermenters
Speidel Plastic Fermenter | Round HDPE Storage Tank | 12L | 3.2 gal
Speidel Plastic Fermenter | Round HDPE Storage Tank | 12L | 3.2 gal
BEST ANSWER: This diptube will absolutely work with the 3 gallon fermenter. It may have to be rotated just a bit up from flush, but that won't cause any problems.
How do you get this to seal with the stock gasket and screw cap? I tried the gasket on both sides of the disc and it leaks.
Kevin McMullin on Jan 4, 2018
BEST ANSWER: Got this from one of the product designers. "The stock gasket needs to be placed between the tank and metal disc. You must be careful when positioning and tightening, as the stock gasket can slip from lip of the tank"
How do you take the Speidel spigot assembly apart so that you can use the sleeve to attach this dip tube?
Jack K on Feb 1, 2018
Stainless Dip Tube for Speidel Plastic Fermenters
Stainless Dip Tube for Speidel Plastic Fermenters
Replacement NW10 Spigot for Speidel Plastic Fermenters
Replacement NW10 Spigot for Speidel Plastic Fermenters
BEST ANSWER: The orange spigot will come out of the white plastic piece, it will take a good push. I press the bottom (where the beer comes out) against my counter while rotating the handle. It will pop out, then the whole thing comes apart. I found that you can reassemble the spigot from either direction and it provides a lower or higher position for the drain, check when you reassemble which way you want it.
Will this allow me to rack off my gross lees through the bottom rather than siphoning or pumping through the top?
William T on Aug 17, 2019
BEST ANSWER: Hello William, in theory that could work. However, it would only work if the dip tube was oriented above the gross lees with the tip above the lees. It may be hard to know how high up your gross lees goes. To get the clearest wine, we recommend racking from the top to avoid transferring the gross lees.
Is a dip tub less prone to clogging?
Andrew F Q on Feb 25, 2018
BEST ANSWER: It will depend on how much debris such as hops, are in the fermentor. Cold crashing will help you achieve a very clean and clear beer.
Reviews
Powered by Emplifi
3.2 / 5.0
6 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
2
3
1
0
Rated 3 out of 5
Finicky Seal
The manufacture quality of the spigot is solid - no issues there. I've used mine for about four years now, and I have found - as a few others here have as well - that getting a good seal is tricky. I have tried the recommended silicon gaskets, but they are too thin for the round "bulkhead." The standard seas will work, but you really need to do a leak test prior to filling the fermenter. Aside from that, I like that I can attach a valve with a quick-connect fitting for easer transfer.
November 11, 2023
Purchased
 over 4 years ago
Rated 3 out of 5
Depends on what you're looking for
If you're buying this simply to attach a better valve, then it's a great accessory. Buy it. However, if you're hoping to recover additional liquid, you may want to rethink this one. I found that the additional liquid I could get out of my fermenter was about 1 cup, compared to the standard valve; with the fermenter sitting flat. And if I tilted the fermenter, I was able to get far more liquid out of it with the standard valve.
June 10, 2019
Purchased
 over 5 years ago
Response from MoreFlavor
Thank you so much for your feedback. We really appreciate the honesty and value great feedback like this as it helps us improve our products. Cheers!
June 11, 2019
Tyler W Staff
Rated 4 out of 5
The design needs to have a few changes in the tube.
For our operation the way we use the tank, we have had to change the dip tube by adding plastic tubing to the dip tube to make it work for us. Had we not done this change, we would have lost more than a gallon of beer.
November 19, 2018
Purchased
 over 5 years ago
Rated 3 out of 5
good idea, not well executed
The dip tube itself is decent quality, but a better sealing system needs to be worked out.
The speidel seals are relatively narrow, and are usually held in correct position by the cap or spigot assembly. This provides nothing to keep the seal positioned properly, and hence it's very hard to get it to actually create a seal.
In order for this item to actually be useable, i will need to develop my own seal, as I could not get the factory one to work, and wouldn't have been confident in putting 120L of liquid in my fermenter even if I had magically gotten it to line up perfect.

Not ready for primetime IMHO, purchase with the knowledge you may have to do some work to get it useable. I had read previous reviews, and was willing to take a chance, No doubt I can figure out a seal easier than I could fabricate the actual dip tube, but this is not turnkey, and hence the middle of the road rating.
May 10, 2018
Purchased
 over 6 years ago
Rated 4 out of 5
I haven’t used it yet, but it’s high quality.
March 9, 2018
Purchased
 over 6 years ago
Rated 2 out of 5
Leaky
It's a great idea conceptually, but in practice, it is VERY difficult to keep the stock gasket seated tightly between the metal disc and the rim of the fermenter outlet. The result is a very IFFY connection that is prone to serious leaks.
March 2, 2018
Purchased
 over 6 years ago
Response from MoreFlavor
Hey so sorry about your experience. Thank you so much for your feedback. We really appreciate the honesty and value great feedback like this as it helps us improve our products. We try very hard to create the best experience for our customers and provide quality products. Please give us a call at 1-800-600-0033 or email us at info@moreflavor.com so that we can assist you. We are here to help. Cheers!
May 27, 2020
Malcolm l
 
  • CONNECT
  •
  • NEWSLETTER
    Sign up to receive exclusive deals, tips and tricks, special coupons and much more ...